Skroutz.mt

Faseed 700 Green Matt Motorcycle Helmet Jet ECE 22.06
Motorcycle Helmets

Faseed 700 Green Matt Motorcycle Helmet Jet ECE 22.06 Code: 28605556

Key features:

  • Made of thermoplastic material
  • Scratch-resistant visor
  • Lightweight
  • Micrometric ratchet closure
  • Removable hypoallergenic lining
See full description

  • Type

    Jet

    The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • Color Finish Matt
  • See all

Size

Faseed size guide
Faseed size guide

Size

Faseed size guide
International
49,00 €
14,00 € Sent from Greece
Product report

Description

Description

The 700 from Faseed is a jet helmet, which thanks to its open design at the lower part of the face, can be put on and taken off comfortably. It is considered one of the lightest types of helmets, however, it leaves a large area of the face uncovered and therefore falls short in safety compared to a full-face helmet. It is made of thermoplastic, a hard material, heavier compared to other materials. It secures with a microlock type buckle, allowing you to fasten it easily and quickly.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
28605556

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Colour
Green
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (20)

Reviews

4.6
20
4.6
Review this product
  1. 13
  2. 6
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Visibility
  • Weight
  • Application
  • Value for money
  • Ventilation
  • Construction quality
  • Low aerodynamic noise

Reviews by our members

Description & Specifications

The 700 from Faseed is a jet helmet, which thanks to its open design at the lower part of the face, can be put on and taken off comfortably. It is considered one of the lightest types of helmets, however, it leaves a large area of the face uncovered and therefore falls short in safety compared to a full-face helmet. It is made of thermoplastic, a hard material, heavier compared to other materials. It secures with a microlock type buckle, allowing you to fasten it easily and quickly.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
28605556

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Colour
Green
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (20)

4.6
20
4.6
Review this product
  1. 13
  2. 6
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Visibility
  • Weight
  • Application
  • Value for money
  • Ventilation
  • Construction quality
  • Low aerodynamic noise

Reviews by our members

49,00 €
14,00 €   shipping cost