How it comes that in the deepcool site it says that it comes with 2 fans and u sell it with 1 fan ? 100 euro for 1 fan not worth it

Very compact for the heat dissipation it advertises and the volume of air it moves.
The reviews and the manufacturer's measurements differ quite a bit compared to real-life use, and the case in which it is installed and the processor it is called to cool play a very important role.
It was installed inside an NZXT H700i and cools a 5600X with relative difficulty.
I have tried several thermal pastes, I have checked its application on the CPU with a special graphite sheet and it fits perfectly.
Unfortunately, for some reason, I have idle temps of 56-60 degrees and during gaming with 80-100% utilization, it stays permanently at 85++.
And these are at full speed from the silent/full switch on the cooler.
The CPU has never throttled, but from what I read, I have significantly higher temperatures.
Unfortunately, it is marginally less efficient than the NH-D14 I had before.
Otherwise, a very good purchase for its price.

EDIT: 12/2025 and I see differences in temperature with the latest BIOS update 27-10-25, which for some reason I had never done, and by changing the middle fan with an NF-A14x25R.
Temperatures are still high but within reasonable limits because the processor is inherently hot. Now after the update and also because of winter, I have 33-40 idle and 72-78 at 100% utilization. The cooler responds very well and noise has also been reduced quite a bit with the fan change.
Soon I will 3D print a bracket and a shroud to add a third fan at the front, and I will return with the results for temperature and noise.

EDIT2: 04/2026 I have 3D printed a shroud identical to the factory one from Printables and installed a NOCTUA NF-A12x25 G2, and the temperatures are not drastically different, I saw 1-2 degrees lower at 100% utilization. BUT, the noise has increased slightly due to the increased air volume.

For 8 months, it has taken on the tough task of cooling a Ryzen 7900X (in a Lancool III case with a full set of fans in the front and top) and it’s doing great. It also looks super with the black color and the plastic aesthetics. Reading various reviews for the 7900X, I hesitated to put an air cooler on this specific processor, but on the other hand, I don’t want to mess with AiO again if I can avoid it. It seems that everything is going well so far.

The construction and materials are of very high quality, but the installation is tiring in a mid-sized case, hence the 4 stars. The cooling is very good, the 14600k has not exceeded 68 degrees even under heavy load. Also, for those interested in the appearance of the case, it provides an elegant cooling solution.