Skroutz.mt

Cudy AP3000 Access Point Wi‑Fi 6 Dual Band (2.4 & 5GHz)
Access Points

Cudy AP3000 Access Point Wi‑Fi 6 Dual Band (2.4 & 5GHz)

Key features:

  • AX Wi-Fi
  • Gigabit PoE Port
  • 6 KV Protection
  • IP65 Waterproof
See full description

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.

  • Wi-Fi Generation

    Wi‑Fi 6

    The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

    Ideal for homes with many smart devices.

    Compatible with all previous generations.
  • See all
Product report

Description

Description

Ultra-fast, ultra-efficient AX3000 Wi-Fi 6

Wi-Fi 6 with a higher channel width of 160 MHz and 1024-QAM modulation delivers total performance of up to 3 Gbps. OFDMA and MU-MIMO work with uplink plug reception instructions, allowing it to connect over 100 devices while minimizing latency. (Maximum 512 devices)

High-Power Wi-Fi Coverage with Five PAs

Equipped with five power amplifiers and a 3+2 antenna structure, this access point offers top signal navigation capabilities through physical obstacles.

Operates in rain, thunder, dust, heat, cold

The access point is protected by an IP65-rated enclosure, which shields it from rain and dust when installed vertically. It also features 6 kV lightning/surge protection and 8 kV electrostatic discharge protection for greater reliability during storms. Its operating temperatures range from -40 °F to 158 °F (-40 ℃ to 70 ℃).

Seamless roaming for a smooth Wi-Fi experience

Enhance your guests' Wi-Fi experience by implementing a single Wi-Fi name throughout your entire space. With mesh technology, enjoy seamless roaming as customers connect effortlessly to the strongest available Wi-Fi node without manual switching.

Just plug and unplug for mesh installation

Connect the LAN port of the PoE adapter to a Cudy Mesh AP/router/Mesh unit/VPN router/AC to add the new AP to the Mesh network. Feel free to disconnect it or continue using the Ethernet backhaul after pairing.

Leave the rest to adaptive routing

Adaptive Routing improves the system's awareness of the capacity used by each node. The system will automatically switch to a better route once the initial backhaul route is congested.

Gigabit Port with Dual PoE Options

Supports two power supply methods—

  • 802.3at PoE (Maximum power: 18 W, Idle operation: 5 W)
  • 48-57 V Passive PoE (Adapter included, not waterproof)

If you need to simplify wiring, we recommend using a PoE switch that powers multiple devices simultaneously. Refer to the Cudy PoE Switches section for more information.

Mounting kit included

The package includes a mounting kit, which supports—

  • Wall mounting
  • Pole mounting


Centralized AP Management

Easily manage up to 200 access points with the Cudy AP controller (Model: C200P), allowing efficient bulk configuration and firmware updates through a unified interface.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11ac, 802.11ax, 802.11a, 802.11 b/g/n
LAN speed
2500 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (3)

Reviews

5.0
3
5.0
Review this product
  1. 3
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Operational stability
  • Ease of installation
  • Speed
  • Range
  • Value for money

Description & Specifications

Ultra-fast, ultra-efficient AX3000 Wi-Fi 6

Wi-Fi 6 with a higher channel width of 160 MHz and 1024-QAM modulation delivers total performance of up to 3 Gbps. OFDMA and MU-MIMO work with uplink plug reception instructions, allowing it to connect over 100 devices while minimizing latency. (Maximum 512 devices)

High-Power Wi-Fi Coverage with Five PAs

Equipped with five power amplifiers and a 3+2 antenna structure, this access point offers top signal navigation capabilities through physical obstacles.

Operates in rain, thunder, dust, heat, cold

The access point is protected by an IP65-rated enclosure, which shields it from rain and dust when installed vertically. It also features 6 kV lightning/surge protection and 8 kV electrostatic discharge protection for greater reliability during storms. Its operating temperatures range from -40 °F to 158 °F (-40 ℃ to 70 ℃).

Seamless roaming for a smooth Wi-Fi experience

Enhance your guests' Wi-Fi experience by implementing a single Wi-Fi name throughout your entire space. With mesh technology, enjoy seamless roaming as customers connect effortlessly to the strongest available Wi-Fi node without manual switching.

Just plug and unplug for mesh installation

Connect the LAN port of the PoE adapter to a Cudy Mesh AP/router/Mesh unit/VPN router/AC to add the new AP to the Mesh network. Feel free to disconnect it or continue using the Ethernet backhaul after pairing.

Leave the rest to adaptive routing

Adaptive Routing improves the system's awareness of the capacity used by each node. The system will automatically switch to a better route once the initial backhaul route is congested.

Gigabit Port with Dual PoE Options

Supports two power supply methods—

  • 802.3at PoE (Maximum power: 18 W, Idle operation: 5 W)
  • 48-57 V Passive PoE (Adapter included, not waterproof)

If you need to simplify wiring, we recommend using a PoE switch that powers multiple devices simultaneously. Refer to the Cudy PoE Switches section for more information.

Mounting kit included

The package includes a mounting kit, which supports—

  • Wall mounting
  • Pole mounting


Centralized AP Management

Easily manage up to 200 access points with the Cudy AP controller (Model: C200P), allowing efficient bulk configuration and firmware updates through a unified interface.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11ac, 802.11ax, 802.11a, 802.11 b/g/n
LAN speed
2500 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (3)

5.0
3
5.0
Review this product
  1. 3
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Operational stability
  • Ease of installation
  • Speed
  • Range
  • Value for money
77,90 €
14,00 €   shipping cost