Skroutz.mt

Kraft 4sdm8/12 Single-phase Pump Well 2hp 63555
Submersible Water Pumps

Kraft 4sdm8/12 Single-phase Pump Well 2hp 63555

Key features:

  • Maximum pump submersion: 80m
  • Maximum water temperature: +35ºC
  • Outlet: 1"½
  • Performance: 8400Lit/h

Pump water from great depths with the superior reliability of an oil-lubricated motor, designed according to international NEMA standards.

See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    77

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all

Power

  1. 1125 W

    from 157,25 €

  2. 1500 W

    from 169,15 €

Outlet nozzle

  1. 1 1/2"

    from 157,25 €

  2. 1" / 1/2"

    from 169,15 €

The product is not available for shipping to the selected country.
Product report

Description

Description

Submersible borehole pump from the manufacturer Kraft, used for pumping water from depths greater than 8 meters.

At a glance

  • Powerful 2.0Hp motor: Ensures the required power for stable pumping even under demanding conditions.
  • Maximum immersion up to 80m: Provides the ability to operate in deep wells and tanks with complete safety.
  • Stainless steel: Ensures excellent corrosion resistance and long-term reliability of the body and shaft.
  • Flow rate up to 8.4m³/h: Achieves fast and efficient transfer of large volumes of water for residential or professional use.

Top Performance at Great Depths

You can cover every water supply need, no matter how deep your well is. With the powerful 2.0Hp electric motor and the impressive head of 77 meters, this pump ensures a steady water flow. Its compatibility with wells with a minimum diameter of 4 inches allows you to install it easily, offering a solution for home or professional use.

Robust Construction to High Standards

Forget about corrosion and premature wear. The pump features a body and shaft made of stainless steel, while its impellers are made of durable PPO. Combined with the oil-lubricated motor that complies with strict NEMA standards, you have in your hands a state-of-the-art tool ready to operate flawlessly even in water with a high sand content of up to 0.25%.

Specifications

  • Model: 4SD8/12
  • Type: Single-phase submersible pump 4"
  • Electric motor power: 2.0 Hp
  • Operating voltage: 230 V
  • Capacitors: 60 μF
  • Minimum well diameter: 4" (100 mm)
  • Maximum pump immersion depth: 80 m
  • Maximum head: 77 m
  • Maximum water flow: 8.4 m³/h
  • Pump outlet: 1"½
  • Body and shaft material: Stainless steel
  • Impeller and diffuser material: PPO
  • Motor type: Oil-filled (according to NEMA standards)
  • Maximum water temperature: +35ºC
  • Maximum sand content in water: 0.25%
  • Pump height: 1165 mm
  • Dimensions: 140 x 116 x 1260 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
2 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1500 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
77 m

Maximum Head Height: 77


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
8.4 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
80 m
Maximum Particle Size
2 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

Submersible borehole pump from the manufacturer Kraft, used for pumping water from depths greater than 8 meters.

At a glance

  • Powerful 2.0Hp motor: Ensures the required power for stable pumping even under demanding conditions.
  • Maximum immersion up to 80m: Provides the ability to operate in deep wells and tanks with complete safety.
  • Stainless steel: Ensures excellent corrosion resistance and long-term reliability of the body and shaft.
  • Flow rate up to 8.4m³/h: Achieves fast and efficient transfer of large volumes of water for residential or professional use.

Top Performance at Great Depths

You can cover every water supply need, no matter how deep your well is. With the powerful 2.0Hp electric motor and the impressive head of 77 meters, this pump ensures a steady water flow. Its compatibility with wells with a minimum diameter of 4 inches allows you to install it easily, offering a solution for home or professional use.

Robust Construction to High Standards

Forget about corrosion and premature wear. The pump features a body and shaft made of stainless steel, while its impellers are made of durable PPO. Combined with the oil-lubricated motor that complies with strict NEMA standards, you have in your hands a state-of-the-art tool ready to operate flawlessly even in water with a high sand content of up to 0.25%.

Specifications

  • Model: 4SD8/12
  • Type: Single-phase submersible pump 4"
  • Electric motor power: 2.0 Hp
  • Operating voltage: 230 V
  • Capacitors: 60 μF
  • Minimum well diameter: 4" (100 mm)
  • Maximum pump immersion depth: 80 m
  • Maximum head: 77 m
  • Maximum water flow: 8.4 m³/h
  • Pump outlet: 1"½
  • Body and shaft material: Stainless steel
  • Impeller and diffuser material: PPO
  • Motor type: Oil-filled (according to NEMA standards)
  • Maximum water temperature: +35ºC
  • Maximum sand content in water: 0.25%
  • Pump height: 1165 mm
  • Dimensions: 140 x 116 x 1260 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
2 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1500 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
77 m

Maximum Head Height: 77


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
8.4 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
80 m
Maximum Particle Size
2 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product