Description
Specifications
Vivechrom floor paint is a two-component, water-based epoxy paint for indoor floors and walls. It creates a satin finish that resists chemicals and heavy mechanical stress, as well as water, mild acids and alkalis, road salt, oils, grease and chlorine.
It can be applied to concrete, cement-based plaster and plasterboard in homes, warehouses, industrial flooring and exhibition spaces. It can be cleaned with water and synthetic detergents and has been approved by BAM for disinfection in accordance with DIN 25415-1.
- Type: Two-component, water-based epoxy paint
- Volume: 0.93 L
- Finish: Satin
- Resistance: Impact and abrasion resistance (Taber 70 ± 10 mg / 1,000 cycles)
- Application: By roller or brush
- Mixing ratio: A:B = 80:20 by volume
- Thinning: With water, up to 10% for the first coat and up to 3% for subsequent coats
- Coverage on walls: Approximately 8 m²/L
- Coverage on floors: 3.5–5.5 m²/L per coat
- Pot life: 1.5 hours at 20 °C and approximately 25 minutes at 30 °C
- Walk-on time: After approximately 8 hours
- Recoating: After 16 to 72 hours at 20 °C and 60% relative humidity
- Full curing: Allow at least 7 days before normal use
- Solids: 50% by volume and approximately 63% by weight
- Application temperature: 10–35 °C
- Application relative humidity: Up to 85%
- VOC: Up to 10 g/L
- Standards: DIN 25415-1 and ISO 2813
- Tool cleaning: Immediately with water
Specifications
- Type
- Floor Painting
- Acrilyc
- No
- Luminosity
- Satine
Quantity
- Volume
- 0.93 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.