High-quality silicone plaster with hydrophobic properties, resistant to weather conditions and with excellent breathability to water vapor. It protects the surface from the growth of mold and fungi. It has excellent resistance to UV radiation and temperature. It is suitable for areas with high humidity conditions and environmental pollution.

• Hydrophobic, water-repellent, and weather-resistant
• Excellent breathability to water vapor
• Excellent resistance to UV radiation and temperature

Instructions:

• Preparation: Surfaces must be clean, dry, and smooth, free from dust, oils, or any loose materials or paint. On new surfaces made of cement, concrete, gypsum boards, or surfaces previously covered with plastic or water-based acrylic paints, apply Granikot Primer.
• Application: Shake well before use. Apply with a stainless steel spatula, diluted up to a maximum of 2% with water, and use a plastic spatula to create the final effect. It should not be applied at temperatures lower than 5°C or higher than 35°C and/or relative humidity above 80%. Do not apply the product in rain or under high humidity and strong wind conditions. Protect the surfaces from uneven exposure to sunlight to prevent uneven drying.

The product is dry to the touch in 4-6 hours and fully cured in 24 hours, with times varying depending on weather conditions. After complete curing, the applied material does not require any protection from extreme weather phenomena. Tools are cleaned immediately after use with water and, if necessary, with soap or detergent.