Before First Use:

• Make sure that your power supply voltage matches the one stated on the charger.
• Before using the device for the first time, ensure that the filter and dust container are properly installed.
• Only use the genuine charger provided with the device.
• The 2-in-1 combined nozzle is an attachment that can be connected and detached from the vacuum cleaner.

Operating Instructions:

• Remove the outer cover of the dust collection container before starting the machine. Empty the dust collection container and clean it before each use.
• Press the switch button for about 3 seconds, and the vacuum cleaner will start operating.
• Press the switch again and the vacuum cleaner will stop operating.
• The 2-in-1 combined nozzle is suitable for cleaning fabric crevices as well as hard-to-reach cracks in walls, corners, and gaps.

Cleaning and Maintenance:

• Turn off the vacuum cleaner, disconnect the TYPE-C charger from the device, and then clean the body.
• If necessary, use a dry cloth to wipe down the body, dust container, filter frame, and accessories.
• Ensure no liquid is leaking into the vacuum cleaner. Do not place any parts of the device in the washing machine for cleaning.
• Do not use abrasive cleaners (detergents, thinners) as they will damage the synthetic surface of the vacuum cleaner's body.
• Ensure that all parts of the vacuum cleaner are completely dry before connecting the TYPE-C charger.
• Clean the dust container and filter frame with clean water. Do not use soap or other cleaners as they will damage the filter frame.

Step-by-Step Instructions for Cleaning the Dust Container and Filter Frame:

1. Turn off the machine by pressing the switch button and make sure it is powered off.
2. Hold the vacuum cleaner (preferably by the handle) so that the dust cup is facing down. Rotate the dust collection container to the "unlock" position and remove it.
3. Turn the filter frame to the right, and you will hear a clicking sound indicating that the filter frame is unlocked. Pull it out of the body and separate the HEPA inner filter from the filter frame to clean the dust.
4. Clean the filter frame by gently tapping it to release any dust. Then, clean the dust container and filter frame with clean water and let them air dry.
5. Once the dust cup is emptied, cleaned, and air-dried, reinsert the HEPA filter into the filter frame and place it back into its original position. Ensure that the three bases of the filter frame fit into the three grooves on the dust container: turn the filter frame to the left until it clicks and locks into place. Finally, replace the dust container and rotate it to the locked position.

Features:

• Dimensions: 30 x 6.5 x 6.5 cm