Transparent, water-soluble acrylic primer using nanotechnology, environmentally friendly, for interior and exterior use. Its purpose is to reduce the absorbency of the surface to be painted, stabilize problematic surfaces, and increase the adhesion of overlying water-soluble plastic paints and sealants.

Application Instructions:

• Thin with water at a 1:1 ratio and stir the product well before use.
• The surfaces to be painted must be dry and free of dust, grease, and old paint.
• Any holes or uneven areas should be filled with Acrylic Putty or Two-Component Spatula Putty by Berling.
• Apply the product with a brush or roller at an ambient temperature of 5°C to 35°C and a maximum relative humidity of 70%.

For new surfaces:

• Thin 100% with water and apply one coat to the surface.
• Check if the absorbency of the surface has been reduced.
• For highly absorbent surfaces, a second coat may be required.
• Then, apply two coats of plastic or acrylic paint.

For old surfaces:

• Sand the surfaces with sandpaper.
• Apply one coat of Aquafix primer thinned 1:1 with water and check the absorbency.
• A second coat may also be required.
• Then, apply two coats of plastic or acrylic paint.

After use, remove any remaining paint from painting tools and clean them with soap and water. Waste management should comply with applicable laws and local regulations.