Floaters Action Cameras

Insta360 Case for Insta360 Code: CINSAAXK

Float Guard

The life jacket for the Ace/Ace Pro.

  • Floating and safe.
  • Designed for water sports.
  • Prevents the Camera from sinking and is highly visible in the water.
  • Extremely lightweight material,...

Float Guard

The life jacket for the Ace/Ace Pro.

  • Floating and safe.
  • Designed for water sports.
  • Prevents the Camera from sinking and is highly visible in the water.
  • Extremely lightweight material, made from specially custom EVA material that weighs only 39 grams.
  • Fully accessible, the camera buttons, microphone, and Flip touchscreen are all accessible.
  • ...
See full description See full description

Learn more about invoicing

Description

Description

Float Guard

The life jacket for the Ace/Ace Pro.

  • Floating and safe.
  • Designed for water sports.
  • Prevents the Camera from sinking and is highly visible in the water.
  • Extremely lightweight material, made from specially custom EVA material that weighs only 39 grams.
  • Fully accessible, the camera buttons, microphone, and Flip touchscreen are all accessible.
  • Compatible with quick release mount and Cold Shoe.

Manufacturer

See full description

Specifications

Specifications

Product Number
CINSAAXK

Product Details

Type
Case
Compatibility
Insta360

Model Compatibility

GoPro
-
Insta360
Ace, Ace Pro

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • The Insta360 Float Guard is a lightweight and practical protective accessory that keeps the camera on the water’s surface in case it falls in, something essential for the Ace, Ace Pro, and action cams in general when working in the sea or a pool.

    On the positive side, it is made of high-density foam, with low weight and a small footprint so it does not affect the grip or balance of the camera. The fit is secure and it does not slip, although it is a bit difficult to put on the first few times until it “opens up” slightly, and care is needed when removing it. The bright orange color helps it be spotted immediately in the water.
    It offers real safety for water shots, does not weigh down the setup, and does not interfere in any way. It has proper cutouts for immediate access to all the camera’s buttons and screens.

    On the negative side, it increases the camera’s bulk quite a bit, as I show you in the photos. It is not ideal for very dynamic shots in the water and of course it does not replace a proper waterproof housing. It is not possible to use the screen flip-out function when the camera is inside the float guard.

    Overall, it is an honest and useful solution for anyone who shoots often at sea and wants a simple but effective “life jacket” for their camera. Since the camera does not fit with a waterproof housing, also replace the front mic cover with the waterproof one provided by Insta360, and if you use it at sea, give it a good rinse afterward.

    If you use it at sea with the mouth mount, it may tire you out a bit because it will tend to rise toward the water’s surface. Also, the setup is comically large, see photos.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

  • The Insta360 Float Guard is a lightweight and practical protective accessory that keeps the camera on the water’s surface in case it falls in, something essential for the Ace, Ace Pro, and action cams in general when working in the sea or a pool.

    On the positive side, it is made of high-density foam, with low weight and a small footprint so it does not affect the grip or balance of the camera. The fit is secure and it does not slip, although it is a bit difficult to put on the first few times until it “opens up” slightly, and care is needed when removing it. The bright orange color helps it be spotted immediately in the water.
    It offers real safety for water shots, does not weigh down the setup, and does not interfere in any way. It has proper cutouts for immediate access to all the camera’s buttons and screens.

    On the negative side, it increases the camera’s bulk quite a bit, as I show you in the photos. It is not ideal for very dynamic shots in the water and of course it does not replace a proper waterproof housing. It is not possible to use the screen flip-out function when the camera is inside the float guard.

    Overall, it is an honest and useful solution for anyone who shoots often at sea and wants a simple but effective “life jacket” for their camera. Since the camera does not fit with a waterproof housing, also replace the front mic cover with the waterproof one provided by Insta360, and if you use it at sea, give it a good rinse afterward.

    If you use it at sea with the mouth mount, it may tire you out a bit because it will tend to rise toward the water’s surface. Also, the setup is comically large, see photos.

    Translated from Greek ·
    0
  • 0
  • See all

Description & Specifications

Float Guard

The life jacket for the Ace/Ace Pro.

  • Floating and safe.
  • Designed for water sports.
  • Prevents the Camera from sinking and is highly visible in the water.
  • Extremely lightweight material, made from specially custom EVA material that weighs only 39 grams.
  • Fully accessible, the camera buttons, microphone, and Flip touchscreen are all accessible.
  • Compatible with quick release mount and Cold Shoe.

Manufacturer

Product Number
CINSAAXK

Product Details

Type
Case
Compatibility
Insta360

Model Compatibility

GoPro
-
Insta360
Ace, Ace Pro

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • The Insta360 Float Guard is a lightweight and practical protective accessory that keeps the camera on the water’s surface in case it falls in, something essential for the Ace, Ace Pro, and action cams in general when working in the sea or a pool.

    On the positive side, it is made of high-density foam, with low weight and a small footprint so it does not affect the grip or balance of the camera. The fit is secure and it does not slip, although it is a bit difficult to put on the first few times until it “opens up” slightly, and care is needed when removing it. The bright orange color helps it be spotted immediately in the water.
    It offers real safety for water shots, does not weigh down the setup, and does not interfere in any way. It has proper cutouts for immediate access to all the camera’s buttons and screens.

    On the negative side, it increases the camera’s bulk quite a bit, as I show you in the photos. It is not ideal for very dynamic shots in the water and of course it does not replace a proper waterproof housing. It is not possible to use the screen flip-out function when the camera is inside the float guard.

    Overall, it is an honest and useful solution for anyone who shoots often at sea and wants a simple but effective “life jacket” for their camera. Since the camera does not fit with a waterproof housing, also replace the front mic cover with the waterproof one provided by Insta360, and if you use it at sea, give it a good rinse afterward.

    If you use it at sea with the mouth mount, it may tire you out a bit because it will tend to rise toward the water’s surface. Also, the setup is comically large, see photos.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

  • The Insta360 Float Guard is a lightweight and practical protective accessory that keeps the camera on the water’s surface in case it falls in, something essential for the Ace, Ace Pro, and action cams in general when working in the sea or a pool.

    On the positive side, it is made of high-density foam, with low weight and a small footprint so it does not affect the grip or balance of the camera. The fit is secure and it does not slip, although it is a bit difficult to put on the first few times until it “opens up” slightly, and care is needed when removing it. The bright orange color helps it be spotted immediately in the water.
    It offers real safety for water shots, does not weigh down the setup, and does not interfere in any way. It has proper cutouts for immediate access to all the camera’s buttons and screens.

    On the negative side, it increases the camera’s bulk quite a bit, as I show you in the photos. It is not ideal for very dynamic shots in the water and of course it does not replace a proper waterproof housing. It is not possible to use the screen flip-out function when the camera is inside the float guard.

    Overall, it is an honest and useful solution for anyone who shoots often at sea and wants a simple but effective “life jacket” for their camera. Since the camera does not fit with a waterproof housing, also replace the front mic cover with the waterproof one provided by Insta360, and if you use it at sea, give it a good rinse afterward.

    If you use it at sea with the mouth mount, it may tire you out a bit because it will tend to rise toward the water’s surface. Also, the setup is comically large, see photos.

    Translated from Greek ·
    0
  • 0
  • See all
24,16 €
14,00 €   shipping cost