The Mercusys MS110P v1 unmanaged Layer 2 switch connects devices through 10 Ethernet ports with speeds of 10/100 Mbps. Eight ports provide PoE+ to transmit data and power over the same cable. The other two ports serve as uplinks for connecting to the Internet and an NVR. Extend mode supports PoE transmission over distances of up to 250 m, while Isolation mode separates traffic on ports 1–8.

Port prioritization supports voice and video applications, while PoE Auto Recovery automatically reboots a connected PoE device if it stops transmitting data for an extended period. The switch supports automatic speed negotiation and MDI/MDIX without requiring additional configuration. Its metal casing helps dissipate heat and reduce interference, and it operates silently.

• Type: Unmanaged Layer 2 desktop switch
• Ethernet ports: 10 RJ-45 ports, 10/100 Mbps, with automatic speed negotiation and MDI/MDIX
• PoE+ ports: 8, ports 1–8
• Uplink ports: 2 non-PoE ports, ports 9–10, for connecting to the Internet and an NVR
• PoE+ power: Up to 30 W per port, with a total power budget of 65 W
• PoE standards: IEEE 802.3af and IEEE 802.3at
• Extend mode: PoE transmission over distances of up to 250 m
• Isolation mode: Separates traffic on ports 1–8
• Port prioritization: Prioritizes data on designated ports for voice and video applications
• PoE Auto Recovery: Automatically reboots a PoE device that stops transmitting data for an extended period
• Switching capacity: 2 Gbps
• MAC address table: 2,000 entries
• Jumbo Frame: 2 KB
• Network standards: IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
• Data transfer rates: 10/100 Mbps in half duplex, 20/200 Mbps in full duplex
• Transmission method: Store-and-forward
• Additional features: 802.3x Flow Control
• LED indicators: Link and activity, PoE status for each Ethernet port, and power
• Casing: Metal
• Operation: Silent, with no additional configuration required
• Installation: On a flat surface or wall
• External power adapter: Input: 100–240 V AC, 50/60 Hz; output: 53.5 V / 1.31 A
• Maximum power consumption: 2.96 W with no PD device connected and 77.52 W with a 65 W PD device connected, at 220 V / 50 Hz
• Maximum heat dissipation: 10.064 BTU/h with no PD device connected and 263.568 BTU/h with a 65 W PD device connected
• Operating temperature: 0 to 40 °C
• Storage temperature: -40 to 70 °C
• Operating humidity: 10% to 90%, non-condensing
• Storage humidity: 5% to 95%, non-condensing
• Dimensions: 171 × 98 × 27 mm
• Certifications: CE, RoHS
• Package contents: Switch, power adapter, rubber feet, and user manual