Garage Door Remote Controls

Gbs Elettronica Jolly Line 2167 3-Channel Cloning Garage Door Remote Control with Stable Code 433.92MHz

Jolly line 2167 Sun Visor 3 Multi frequency remote control for garage doors, shutters, lighting, and irrigation. Supports programming of three or one button, with the ability to copy remotes at...

Jolly line 2167 Sun Visor 3 Multi frequency remote control for garage doors, shutters, lighting, and irrigation. Supports programming of three or one button, with the ability to copy remotes at 433.92MHz or rolling code. Includes a hook for installation in the car.

Programming:

  • Common remotes: Press and hold buttons A and B at the same time until the LED...
See full description See full description

Description

Description

Jolly line 2167 Sun Visor 3 Multi frequency remote control for garage doors, shutters, lighting, and irrigation. Supports programming of three or one button, with the ability to copy remotes at 433.92MHz or rolling code. Includes a hook for installation in the car.

Programming:

  • Common remotes: Press and hold buttons A and B at the same time until the LED blinks. Place the remotes 2 cm apart and hold the button you want to copy. Repeat for other commands.
  • BFT: Press buttons A and B until the LED blinks. Follow the same procedure with the original remote.
  • FAAC and GENIUS (MASTER): Press buttons A and B until the LED blinks. Follow the same procedure with the original remote.
  • V2: Press buttons A and B until the LED blinks. Follow the same procedure with the original remote.

Tuning with the Central Unit:

  • Via ALSO function: Go near the central unit, press buttons C and D until the LED turns off. While it blinks, press the programmed button.

Features:

  • Frequency: multi-frequency.

Manufacturer

See full description

Specifications

Specifications

Frequency Programming
Stable
Frequency
433.92 MHz
Channel
3
Cloning
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (10)

Reviews

  1. 8
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • Quality
  • Is it easy to program?
  • Value for money

Reviews by our members

  • kolydas.n

    Verified purchase

    I received it with one CR2032 battery instead of two CR2016 as stated on the packaging. Copying according to the instructions was impossible. All possible key combinations were of course tried. We are talking about copying from a simple fixed code 433 mhz remote control. Even after changing the battery from 1 X CR2032 to 2 X CR2016, the result was just as disappointing.

    Translated from Greek ·
    • Quality
    • It is not easy to program
    • Value for money
    Did you find this review helpful?
  • Dimitri2274

    Verified purchase

    Very good and convenient! I got it to replace the original remote control for the gate, which I always had to look for in the gear lever area to see/find where it was and hold it in my hands when arriving home. This one, you just place it permanently on the sun visor and simply press the button blindly without searching. The instructions are understandable and it is programmed very easily. Tip: Before attaching the metal clip to the remote, open it a bit with your hands to loosen it. It is very tight and will leave a mark on the sun visor from the pressure. Extra tip: I also filed down the edges that touch the sun visor a bit because they were very sharp.

    Translated from Greek ·
    • Quality
    • Is it easy to program?
    • Value for money
    Did you find this review helpful?
  • I still have it even today 01/26 and it works perfectly. The only thing I managed to copy was at 433.92MHz.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

  • Verified purchase

  • Verified purchase

    • Quality
    • Is it easy to program?
    • Value for money
    • Quality
    • Is it easy to program?
    • Value for money
  • Verified purchase

  • Verified purchase

    • Quality
    • Is it easy to program?
    • Value for money
  • I received it with one CR2032 battery instead of two CR2016 as stated on the packaging. Copying according to the instructions was impossible. All possible key combinations were of course tried. We are talking about copying from a simple fixed code 433 mhz remote control. Even after changing the battery from 1 X CR2032 to 2 X CR2016, the result was just as disappointing.

    Translated from Greek ·
    0
  • Very good and convenient! I got it to replace the original remote control for the gate, which I always had to look for in the gear lever area to see/find where it was and hold it in my hands when arriving home. This one, you just place it permanently on the sun visor and simply press the button blindly without searching. The instructions are understandable and it is programmed very easily. Tip: Before attaching the metal clip to the remote, open it a bit with your hands to loosen it. It is very tight and will leave a mark on the sun visor from the pressure. Extra tip: I also filed down the edges that touch the sun visor a bit because they were very sharp.

    Translated from Greek ·
    0
  • I still have it even today 01/26 and it works perfectly. The only thing I managed to copy was at 433.92MHz.

    Translated from Greek ·
    0
  • 0
  • 0
  • See all

Description & Specifications

Jolly line 2167 Sun Visor 3 Multi frequency remote control for garage doors, shutters, lighting, and irrigation. Supports programming of three or one button, with the ability to copy remotes at 433.92MHz or rolling code. Includes a hook for installation in the car.

Programming:

  • Common remotes: Press and hold buttons A and B at the same time until the LED blinks. Place the remotes 2 cm apart and hold the button you want to copy. Repeat for other commands.
  • BFT: Press buttons A and B until the LED blinks. Follow the same procedure with the original remote.
  • FAAC and GENIUS (MASTER): Press buttons A and B until the LED blinks. Follow the same procedure with the original remote.
  • V2: Press buttons A and B until the LED blinks. Follow the same procedure with the original remote.

Tuning with the Central Unit:

  • Via ALSO function: Go near the central unit, press buttons C and D until the LED turns off. While it blinks, press the programmed button.

Features:

  • Frequency: multi-frequency.

Manufacturer

Frequency Programming
Stable
Frequency
433.92 MHz
Channel
3
Cloning
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (10)

  1. 8
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • Quality
  • Is it easy to program?
  • Value for money

Reviews by our members

  • kolydas.n

    Verified purchase

    I received it with one CR2032 battery instead of two CR2016 as stated on the packaging. Copying according to the instructions was impossible. All possible key combinations were of course tried. We are talking about copying from a simple fixed code 433 mhz remote control. Even after changing the battery from 1 X CR2032 to 2 X CR2016, the result was just as disappointing.

    Translated from Greek ·
    • Quality
    • It is not easy to program
    • Value for money
    Did you find this review helpful?
  • Dimitri2274

    Verified purchase

    Very good and convenient! I got it to replace the original remote control for the gate, which I always had to look for in the gear lever area to see/find where it was and hold it in my hands when arriving home. This one, you just place it permanently on the sun visor and simply press the button blindly without searching. The instructions are understandable and it is programmed very easily. Tip: Before attaching the metal clip to the remote, open it a bit with your hands to loosen it. It is very tight and will leave a mark on the sun visor from the pressure. Extra tip: I also filed down the edges that touch the sun visor a bit because they were very sharp.

    Translated from Greek ·
    • Quality
    • Is it easy to program?
    • Value for money
    Did you find this review helpful?
  • I still have it even today 01/26 and it works perfectly. The only thing I managed to copy was at 433.92MHz.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

  • Verified purchase

  • Verified purchase

    • Quality
    • Is it easy to program?
    • Value for money
    • Quality
    • Is it easy to program?
    • Value for money
  • Verified purchase

  • Verified purchase

    • Quality
    • Is it easy to program?
    • Value for money
  • I received it with one CR2032 battery instead of two CR2016 as stated on the packaging. Copying according to the instructions was impossible. All possible key combinations were of course tried. We are talking about copying from a simple fixed code 433 mhz remote control. Even after changing the battery from 1 X CR2032 to 2 X CR2016, the result was just as disappointing.

    Translated from Greek ·
    0
  • Very good and convenient! I got it to replace the original remote control for the gate, which I always had to look for in the gear lever area to see/find where it was and hold it in my hands when arriving home. This one, you just place it permanently on the sun visor and simply press the button blindly without searching. The instructions are understandable and it is programmed very easily. Tip: Before attaching the metal clip to the remote, open it a bit with your hands to loosen it. It is very tight and will leave a mark on the sun visor from the pressure. Extra tip: I also filed down the edges that touch the sun visor a bit because they were very sharp.

    Translated from Greek ·
    0
  • I still have it even today 01/26 and it works perfectly. The only thing I managed to copy was at 433.92MHz.

    Translated from Greek ·
    0
  • 0
  • 0
  • See all
11,90 €
14,00 €   shipping cost