Satellite Accessories

Edision Kit Mast Amplifier MAK-300

The Edision MAK-300 masthead amplifier kit includes the AMP-30 amplifier and the PSU-2402 power supply for terrestrial digital TV antenna installations. The amplifier has two UHF inputs and one VHF/FM...

The Edision MAK-300 masthead amplifier kit includes the AMP-30 amplifier and the PSU-2402 power supply for terrestrial digital TV antenna installations. The amplifier has two UHF inputs and one VHF/FM input, with an independent gain control for each input, while the 5G LTE filter reduces related interference. The power supply delivers 24 V DC via coaxial...

See full description See full description
22 49 €
Delivery by Wed, 18 Nov
14,00 €   shipping cost
Sent from Greece
From Silvernose 5.0 (58)
Greece
2 pieces
See Satellite Reception on the page of Silvernose

Learn more about invoicing

Description

Description

The Edision MAK-300 masthead amplifier kit includes the AMP-30 amplifier and the PSU-2402 power supply for terrestrial digital TV antenna installations. The amplifier has two UHF inputs and one VHF/FM input, with an independent gain control for each input, while the 5G LTE filter reduces related interference. The power supply delivers 24 V DC via coaxial cable and has two RF outputs for TVs.

The amplifier is mounted on a mast, and its circuitry is housed in a metal enclosure inside a plastic housing. The power supply is designed for indoor use and features a power indicator light.

  • Type: Masthead amplifier and power supply kit
  • UHF inputs: 2
  • VHF/FM inputs: 1
  • UHF frequency range: 470–694 MHz
  • VHF/FM frequency range: 45–232 MHz
  • Adjustable UHF gain: 17–32 dB per input
  • Adjustable VHF/FM gain: 5–20 dB
  • 5G LTE filter: Interference rejection greater than 20 dB
  • Maximum output level: 107 dBμV
  • Noise figure: 5 dB
  • Impedance: 75 Ω
  • Amplifier connection: Female F-type connector
  • Amplifier power supply: 24 V DC
  • Amplifier power consumption: 90 mA
  • Power supply outputs: 2 RF outputs for TVs
  • Power supply pass-through frequency range: 5–862 MHz
  • Power supply input: AC 100–240 V, 50/60 Hz
  • Power supply output: DC 24 V, 200 mA
  • Power supply insertion loss: 4.5 dB
  • Power supply installation: Indoors, on a horizontal or vertical surface
  • Power supply operating temperature: 0–50 °C
  • Power supply storage temperature: -20–70 °C
  • Power supply operating humidity: 10–85% RH, non-condensing
  • Amplifier dimensions with housing: 110 × 115 × 50 mm
  • Amplifier weight: 0.24 kg
  • Amplifier housing colour: Blue
  • Power supply dimensions: 57 × 80 × 33 mm
  • Power supply weight: 0.14 kg
  • Power supply colour: White
  • Package contents: AMP-30 amplifier, outdoor housing, PSU-2402 power supply, cable tie, plastic adjustment screwdriver, mounting screws and wall plugs, user manual in GR/EN/DE/ES/IT/FR

Manufacturer

See full description

Specifications

Specifications

Type
Mast Amplifier

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (4)

Reviews

  1. 3
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Durability
  • Is it as it appears in the photo?
  • Quality
  • Value for money
  • EmmGal
    5
    1 out of 1 members found this review helpful

    The build quality is very good, with excellent shielding and very good performance even in the rather problematic area where my house is located, with a hill and tall buildings in front that together block the line of sight to the repeaters.
    The only negative point, though I don’t think it’s significant, is the lack of a metal mounting clamp for the mast. This is because the plastic cable tie dries out over time from exposure to the sun, causing the amplifier to eventually hang from the cables and need to be wrapped with tape, as has already happened to me with another installation using an amplifier mounted in the same way.
    A metal one may rust over time and become impossible to unscrew, but it won’t break on its own—only when we damage it ourselves to replace the amplifier for whatever reason.
    However, since the amplifier performs very well overall, and at a low setting it drives four TV receivers with the help of the same company’s OMS-2 splitter, I recommend it without reservation!
    Update: October 9, 2026
    A few days ago, I increased its gain slightly, from minimum to medium, because during a spell of severe weather—which had not occurred before at any point since it was installed—I found that it needed a little more dB to keep working just as well as it had throughout the summer, when I had it set to minimum gain.
    I’ll therefore leave it permanently on the medium setting, just in case.

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    0 out of 3 members found this review helpful

    Verified purchase

    It is not what I expected. I have another brand that is better

    Translated from Greek ·
    • Durability
    • Is it as it appears in the photo?
    • Quality
    • Value for money
    Did you find this review helpful?
  • Verified purchase

  • Verified purchase

  • The build quality is very good, with excellent shielding and very good performance even in the rather problematic area where my house is located, with a hill and tall buildings in front that together block the line of sight to the repeaters.
    The only negative point, though I don’t think it’s significant, is the lack of a metal mounting clamp for the mast. This is because the plastic cable tie dries out over time from exposure to the sun, causing the amplifier to eventually hang from the cables and need to be wrapped with tape, as has already happened to me with another installation using an amplifier mounted in the same way.
    A metal one may rust over time and become impossible to unscrew, but it won’t break on its own—only when we damage it ourselves to replace the amplifier for whatever reason.
    However, since the amplifier performs very well overall, and at a low setting it drives four TV receivers with the help of the same company’s OMS-2 splitter, I recommend it without reservation!
    Update: October 9, 2026
    A few days ago, I increased its gain slightly, from minimum to medium, because during a spell of severe weather—which had not occurred before at any point since it was installed—I found that it needed a little more dB to keep working just as well as it had throughout the summer, when I had it set to minimum gain.
    I’ll therefore leave it permanently on the medium setting, just in case.

    Translated from Greek ·
    1
  • It is not what I expected. I have another brand that is better

    Translated from Greek ·
    0
  • 0
  • 0
  • See all

Description & Specifications

The Edision MAK-300 masthead amplifier kit includes the AMP-30 amplifier and the PSU-2402 power supply for terrestrial digital TV antenna installations. The amplifier has two UHF inputs and one VHF/FM input, with an independent gain control for each input, while the 5G LTE filter reduces related interference. The power supply delivers 24 V DC via coaxial cable and has two RF outputs for TVs.

The amplifier is mounted on a mast, and its circuitry is housed in a metal enclosure inside a plastic housing. The power supply is designed for indoor use and features a power indicator light.

  • Type: Masthead amplifier and power supply kit
  • UHF inputs: 2
  • VHF/FM inputs: 1
  • UHF frequency range: 470–694 MHz
  • VHF/FM frequency range: 45–232 MHz
  • Adjustable UHF gain: 17–32 dB per input
  • Adjustable VHF/FM gain: 5–20 dB
  • 5G LTE filter: Interference rejection greater than 20 dB
  • Maximum output level: 107 dBμV
  • Noise figure: 5 dB
  • Impedance: 75 Ω
  • Amplifier connection: Female F-type connector
  • Amplifier power supply: 24 V DC
  • Amplifier power consumption: 90 mA
  • Power supply outputs: 2 RF outputs for TVs
  • Power supply pass-through frequency range: 5–862 MHz
  • Power supply input: AC 100–240 V, 50/60 Hz
  • Power supply output: DC 24 V, 200 mA
  • Power supply insertion loss: 4.5 dB
  • Power supply installation: Indoors, on a horizontal or vertical surface
  • Power supply operating temperature: 0–50 °C
  • Power supply storage temperature: -20–70 °C
  • Power supply operating humidity: 10–85% RH, non-condensing
  • Amplifier dimensions with housing: 110 × 115 × 50 mm
  • Amplifier weight: 0.24 kg
  • Amplifier housing colour: Blue
  • Power supply dimensions: 57 × 80 × 33 mm
  • Power supply weight: 0.14 kg
  • Power supply colour: White
  • Package contents: AMP-30 amplifier, outdoor housing, PSU-2402 power supply, cable tie, plastic adjustment screwdriver, mounting screws and wall plugs, user manual in GR/EN/DE/ES/IT/FR

Manufacturer

Type
Mast Amplifier

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (4)

  1. 3
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Durability
  • Is it as it appears in the photo?
  • Quality
  • Value for money
  • EmmGal
    5
    1 out of 1 members found this review helpful

    The build quality is very good, with excellent shielding and very good performance even in the rather problematic area where my house is located, with a hill and tall buildings in front that together block the line of sight to the repeaters.
    The only negative point, though I don’t think it’s significant, is the lack of a metal mounting clamp for the mast. This is because the plastic cable tie dries out over time from exposure to the sun, causing the amplifier to eventually hang from the cables and need to be wrapped with tape, as has already happened to me with another installation using an amplifier mounted in the same way.
    A metal one may rust over time and become impossible to unscrew, but it won’t break on its own—only when we damage it ourselves to replace the amplifier for whatever reason.
    However, since the amplifier performs very well overall, and at a low setting it drives four TV receivers with the help of the same company’s OMS-2 splitter, I recommend it without reservation!
    Update: October 9, 2026
    A few days ago, I increased its gain slightly, from minimum to medium, because during a spell of severe weather—which had not occurred before at any point since it was installed—I found that it needed a little more dB to keep working just as well as it had throughout the summer, when I had it set to minimum gain.
    I’ll therefore leave it permanently on the medium setting, just in case.

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    0 out of 3 members found this review helpful

    Verified purchase

    It is not what I expected. I have another brand that is better

    Translated from Greek ·
    • Durability
    • Is it as it appears in the photo?
    • Quality
    • Value for money
    Did you find this review helpful?
  • Verified purchase

  • Verified purchase

  • The build quality is very good, with excellent shielding and very good performance even in the rather problematic area where my house is located, with a hill and tall buildings in front that together block the line of sight to the repeaters.
    The only negative point, though I don’t think it’s significant, is the lack of a metal mounting clamp for the mast. This is because the plastic cable tie dries out over time from exposure to the sun, causing the amplifier to eventually hang from the cables and need to be wrapped with tape, as has already happened to me with another installation using an amplifier mounted in the same way.
    A metal one may rust over time and become impossible to unscrew, but it won’t break on its own—only when we damage it ourselves to replace the amplifier for whatever reason.
    However, since the amplifier performs very well overall, and at a low setting it drives four TV receivers with the help of the same company’s OMS-2 splitter, I recommend it without reservation!
    Update: October 9, 2026
    A few days ago, I increased its gain slightly, from minimum to medium, because during a spell of severe weather—which had not occurred before at any point since it was installed—I found that it needed a little more dB to keep working just as well as it had throughout the summer, when I had it set to minimum gain.
    I’ll therefore leave it permanently on the medium setting, just in case.

    Translated from Greek ·
    1
  • It is not what I expected. I have another brand that is better

    Translated from Greek ·
    0
  • 0
  • 0
  • See all
22,49 €
14,00 €   shipping cost