Skroutz.mt

Eurolamp Intermediate Switch 6A
Intermediate Switches

Eurolamp Intermediate Switch 6A Code: 147-05800

The Eurolamp Smart Switch allows lighting control and has a maximum load of 6 A. It operates on a supply voltage of 220–240 V and has an IP20 rating.

  • Use: Lighting
  • Maximum load: 6 A
  • Maximum rated...

The Eurolamp Smart Switch allows lighting control and has a maximum load of 6 A. It operates on a supply voltage of 220–240 V and has an IP20 rating.

  • Use: Lighting
  • Maximum load: 6 A
  • Maximum rated power: 1440 W
  • Supply voltage: 220–240 V
  • IP rating: IP20
  • Operating temperature: From -25 °C to +50 °C
  • Colour: White
  • Material: PA
  • Height: 20 mm
  • Width: 26.5 mm
  • ...
See full description See full description

Top specs

  • Usage

    Lighting

    For remote control of lamps and lighting fixtures.

  • Maximum Load

    It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

    For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
  • See all
1 13 €
Delivery by Tue, 10 Nov
14,00 €   shipping cost
Sent from Greece
From Lampa-shop 4.8 (27)
4.8 (27 reviews)
Greece
8 pieces
See Sockets & Switches on the page of Lampa-shop

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Product report

Description

Description

The Eurolamp Smart Switch allows lighting control and has a maximum load of 6 A. It operates on a supply voltage of 220–240 V and has an IP20 rating.

  • Use: Lighting
  • Maximum load: 6 A
  • Maximum rated power: 1440 W
  • Supply voltage: 220–240 V
  • IP rating: IP20
  • Operating temperature: From -25 °C to +50 °C
  • Colour: White
  • Material: PA
  • Height: 20 mm
  • Width: 26.5 mm
  • Length: 60.2 mm
  • Net weight: 0.142 kg
  • Quantity: 1

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
147-05800

Specifications

Switch Type
Basic
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
6 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Pieces
1
Intermediate Switch
No

Intermediate Switch

Supports two-way switching, allowing the same light fixture to be controlled by two or more physical wall switches.

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

The Eurolamp Smart Switch allows lighting control and has a maximum load of 6 A. It operates on a supply voltage of 220–240 V and has an IP20 rating.

  • Use: Lighting
  • Maximum load: 6 A
  • Maximum rated power: 1440 W
  • Supply voltage: 220–240 V
  • IP rating: IP20
  • Operating temperature: From -25 °C to +50 °C
  • Colour: White
  • Material: PA
  • Height: 20 mm
  • Width: 26.5 mm
  • Length: 60.2 mm
  • Net weight: 0.142 kg
  • Quantity: 1

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
147-05800

Specifications

Switch Type
Basic
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
6 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Pieces
1
Intermediate Switch
No

Intermediate Switch

Supports two-way switching, allowing the same light fixture to be controlled by two or more physical wall switches.

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
1,13 €
14,00 €   shipping cost