Skroutz.mt

Ruijie RG-RAP2260(H) Access Point with Mesh Wi‑Fi 6 Dual Band (2.4 & 5GHz) Single Kit
Access Points

Ruijie RG-RAP2260(H) Access Point with Mesh Wi‑Fi 6 Dual Band (2.4 & 5GHz) Single Kit

The Ruijie RG-RAP2260(H) access point supports Wi‑Fi 6 and Mesh networking for dual-band wireless connectivity on 2.4 and 5 GHz. 4x4 MU‑MIMO technology operates on both bands, while the maximum total...

The Ruijie RG-RAP2260(H) access point supports Wi‑Fi 6 and Mesh networking for dual-band wireless connectivity on 2.4 and 5 GHz. 4x4 MU‑MIMO technology operates on both bands, while the maximum total WLAN speed reaches 5952 Mbps. It can handle up to 512 concurrent users, with 130 recommended.

It supports 8 SSIDs, Layer 2/3 roaming, and management via Ruijie...

See full description See full description

Top specs

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.

  • Wi-Fi Generation

    Wi‑Fi 6

    The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

    Ideal for homes with many smart devices.

    Compatible with all previous generations.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Ruijie RG-RAP2260(H) access point supports Wi‑Fi 6 and Mesh networking for dual-band wireless connectivity on 2.4 and 5 GHz. 4x4 MU‑MIMO technology operates on both bands, while the maximum total WLAN speed reaches 5952 Mbps. It can handle up to 512 concurrent users, with 130 recommended.

It supports 8 SSIDs, Layer 2/3 roaming, and management via Ruijie Cloud. It is ceiling-mounted and powered via PoE+.

  • Wi‑Fi generation: Wi‑Fi 6
  • Frequency: Dual-band 2.4 and 5 GHz
  • Maximum WLAN speed: 5952 Mbps
  • IEEE networking standards: 802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
  • MIMO technology: 4x4 MU‑MIMO
  • Mesh networking: Supported
  • Ethernet ports: 2
  • LAN speed: 5000 Mbps
  • Maximum antenna gain: 3 dBi
  • Maximum transmit power: 30 dBm
  • Mounting: Ceiling
  • Power supply: PoE+
  • Packaging: Single kit

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
5952 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
LAN speed
5000 Mbps
Wi-Fi Mesh Network
Yes

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
3 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
Transmit Power (max)
30 dBm

Transmit Power (max)

Indicates how strong the signal emitted by the device is. A higher value means a stronger signal and greater range, always depending on the space and conditions.
PoE Support
PoE+
MIMO Technology
4x4

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

4x4
Use of four antennas for maximum performance, better stability, and high speeds in environments with many devices.

General Characteristics

Placement
Indoor
Ethernet Ports
2

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Ruijie RG-RAP2260(H) access point supports Wi‑Fi 6 and Mesh networking for dual-band wireless connectivity on 2.4 and 5 GHz. 4x4 MU‑MIMO technology operates on both bands, while the maximum total WLAN speed reaches 5952 Mbps. It can handle up to 512 concurrent users, with 130 recommended.

It supports 8 SSIDs, Layer 2/3 roaming, and management via Ruijie Cloud. It is ceiling-mounted and powered via PoE+.

  • Wi‑Fi generation: Wi‑Fi 6
  • Frequency: Dual-band 2.4 and 5 GHz
  • Maximum WLAN speed: 5952 Mbps
  • IEEE networking standards: 802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
  • MIMO technology: 4x4 MU‑MIMO
  • Mesh networking: Supported
  • Ethernet ports: 2
  • LAN speed: 5000 Mbps
  • Maximum antenna gain: 3 dBi
  • Maximum transmit power: 30 dBm
  • Mounting: Ceiling
  • Power supply: PoE+
  • Packaging: Single kit

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
5952 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
LAN speed
5000 Mbps
Wi-Fi Mesh Network
Yes

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
3 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
Transmit Power (max)
30 dBm

Transmit Power (max)

Indicates how strong the signal emitted by the device is. A higher value means a stronger signal and greater range, always depending on the space and conditions.
PoE Support
PoE+
MIMO Technology
4x4

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

4x4
Use of four antennas for maximum performance, better stability, and high speeds in environments with many devices.

General Characteristics

Placement
Indoor
Ethernet Ports
2

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.