The Schneider Electric iC60H miniature circuit breaker is double-pole and protects AC and DC circuits. It uses thermal-magnetic technology, with a C trip curve and isolation capability.
- Number of poles: 2
- Rated current: 4 A
- Current type: AC and DC
- Trip curve: C
- Tripping technology: Thermal-magnetic
- Icu breaking capacity: 70 kA at 12...133 V AC, 220...240 V AC, 380...415 V AC and 440 V AC · 15 kA at 72...125 V DC
- Icn breaking capacity: 10000 A at 400 V AC
- Category: A
- Magnetic tripping: 8 × In ± 20 %
- Energy-limiting class: 3
- Insulation voltage Ui: 500 V AC
- Impulse withstand voltage Uimp: 6 kV
- Frequency: 50/60 Hz
- Indication: Contact position and tripping
- Mounting: On a DIN rail
- Dimensions: 91 × 36 × 78.5 mm
- Weight: 0.25 kg
- Mechanical endurance: 20000 cycles
- Electrical endurance: 10000 cycles
- Flexible conductor cross-section: 1...16 mm²
- Rigid conductor cross-section: 1...25 mm²
- Stripping length: 14 mm
- Tightening torque: 2 N·m
- Earth-leakage protection: With a separate block
- Standards: EN 60898-1, EN 60947-2, IEC 60898-1, IEC 60947-2
- Degree of protection: IP20
- Pollution degree: 3
- Overvoltage category: IV
- Tropicalisation: 2
- Operating humidity: 95 % at 55 °C
- Operating temperature: -35...70 °C
- Storage temperature: -40...85 °C
Specifications
- Number of Poles
- 2
- Rated Current
- 4 A
- Operating Curve
- Curve C
Power Supply
- AC
- Yes
- DC
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.