The Schneider Electric METSEPM5341 power meter measures active and reactive power, energy, voltage, current, frequency, and power factor. It analyzes power quality up to the 31st harmonic and is installed in an electrical panel. The LCD is backlit and has a resolution of 128 × 128 pixels.
- Display type: Digital
- Number of phases: Single-phase
- Connectivity: Modbus TCP/IP, Ethernet 10/100 Mbit/s
- Power supply: 100...415 V AC (45...65 Hz) or 125...250 V DC
- Rated current: 1 A or 5 A
- Measured current: 10...9000 mA
- Measured voltage: 35...690 V AC phase-to-phase or 20...400 V AC phase-to-neutral
- Frequency range: 45...65 Hz
- Sampling rate: 64 samples/cycle
- Inputs: 2 digital
- Outputs: 2 digital and 2 relay
- Memory: 256 kB
- Active energy accuracy: ±2 %
- Reactive energy accuracy: ±2 %
- Active power accuracy: ±0.5 %
- Apparent power accuracy: ±0.5 %
- Frequency accuracy: ±0.05 %
- Power factor accuracy: ±0.005 %
- Current accuracy: ±0.5 %
- Voltage accuracy: ±0.5 %
- Accuracy class: Class 0.5S for active energy, according to IEC 62053-22
- Insulation: 2500 V
- Degree of protection: IP52 on the front panel, IP30 on the body
- Operating temperature: -25...70 °C
- Storage temperature: -40...85 °C
- Relative humidity: 5...95 % at 50 °C
- Pollution degree: 2
- Maximum operating altitude: 2000 m
- Dimensions: 96 × 72 × 96 mm
- Weight: 430 g
- Standards: IEC 60529, IEC 61557-12, IEC 62053-22, EN 50470-1, EN 50470-3, UL 61010-1, IEC 62053-24
- Certifications: CE according to IEC 61010-1, cULus according to UL 61010-1, MID according to EN 50470-1 and EN 50470-3
Specifications
- Type
- Energy Analyzer
- Display Type
- Digital
- Number of Phases
- Single-phase
Smart Features
- Connectivity
- Modbus, LAN
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.