3D Printer Filament

Creality EN-PLA+ 1.75mm Apple Green 1kg 1τμχ (Spool) 3D Printer Filament Code: 3301010313

Creality EN PLA+ filament for 3D printers offers greater break resistance than standard PLA. EPC winding technology and precise diameter control help ensure smooth feeding and extrusion, while...

Creality EN PLA+ filament for 3D printers offers greater break resistance than standard PLA. EPC winding technology and precise diameter control help ensure smooth feeding and extrusion, while high-purity raw materials contribute to consistent printing. Tested with Creality printers.

  • Material: PLA+
  • Color: Green
  • Filament diameter: 1.75 mm
  • Weight: 1 kg
  • ...
See full description See full description

Top specs

  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
11 29 €
Delivery by Thu, 26 Nov
14,00 €   shipping cost
Sent from Greece
From Grobotronics 4.9 (46)

Learn more about invoicing

Description

Description

Creality EN PLA+ filament for 3D printers offers greater break resistance than standard PLA. EPC winding technology and precise diameter control help ensure smooth feeding and extrusion, while high-purity raw materials contribute to consistent printing. Tested with Creality printers.

  • Material: PLA+
  • Color: Green
  • Filament diameter: 1.75 mm
  • Weight: 1 kg
  • Quantity: 1 piece
  • Packaging: Spool
  • Winding technology: EPC
  • Extruder temperature: 190–230 °C
  • Heated bed temperature: Unheated to 60 °C
  • Print speed: 40–100 mm/s
  • Tensile strength: 34 MPa
  • Flexural strength: 77 MPa

Manufacturer

See full description

Specifications

Specifications

Product Number
3301010313
Material
PLA+
Colour
Green
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (102)

Reviews

  1. 86
  2. 12
  3. 3
  4. 1
  5. 1 star
    0
Review this product

What do users say? AI-generated summary

Overall, users consider the filament good quality and easy to print with, producing attractive results. They report smooth printing with standard PLA settings and good value for money. However, some experienced moisture issues that required drying, or difficulties with adhesion and flow, while some shades differ from expectations.

  • MoiraDawn
    5
    1 out of 1 members found this review helpful

    Verified purchase

    This review is about the colour: Multicolour

    Beautiful prints without faults due to the filament, nice color transitions, as well as the result. Everything I printed for my little one, he was thrilled with the colors (especially the poop emoji). I will choose it again!

    Translated from Greek ·
    Did you find this review helpful?
  • sotris165
    3
    1 out of 1 members found this review helpful

    Verified purchase

    This review is about the colour: Red

    As a material OK I had no problem like all the others but as a color it's definitely not red, it's a bit darker than orange and quite a bit lighter than red. I would call it Coral

    Translated from Greek ·
    Did you find this review helpful?
  • pavlandr1
    5
    1 out of 1 members found this review helpful

    Verified purchase

    This review is about the colour: Black

    For its price, excellent! (I got it for €12) ...I had no problems! Personal recommendation to everyone, just make sure it hasn't absorbed moisture from the factory - otherwise, do a drying and it will be fine.

    In general, 3/3 spools, all prints were perfect, neither warping nor shrinking

    Translated from Greek ·
    Did you find this review helpful?
  • HaruTzuki
    3
    0 out of 1 members found this review helpful

    Verified purchase

    This review is about the colour: Orange

    It is PLA+, which means it is a bit different from regular PLA. It took quite a bit of effort to print it on the Ender 3 V3 KE. The layers would separate from each other or the first layer would detach. I searched on Reddit and others had similar experiences, and generally, you need to tweak the cooling. The settings I used that seemed to work and finally allowed me to print what I wanted were:

    • For the first 3 layers, have no cooling
    • For all subsequent layers, have the fans running at 50 to 60% of their power.

    It might matter that my printer is open-type and not enclosed. However, with the equivalent eSun PLA+ filaments, I don't have any issues.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Blue

    The shade is light blue, a lighter color than in the photo. It arrived with a lot of moisture and needed drying.

    Translated from Greek ·
    Did you find this review helpful?
  • Yanjo3DPrints
    4
    2 out of 2 members found this review helpful

    Verified purchase

    This review is about the colour: Multicolour

    Good material, I work quite a bit with ombre in general so I worked it a lot. It is more glossy than the rest of the Ender series. 4 stars because for a period it made me experience clogs. It requires slightly more temperature than usual. Overall good adhesion and result. Not the best I've seen, but quite good.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Red

    While most of the Ender series were decent, the "red" is not red and as a material it drips a lot. It was used on Ender 3 S1.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Black

    Good and easy material. I print on Ender 3 S1 - Nozzle 195 first 200-205 later & Bed 60-70 depending on the size of the file that touches the bed. I have the stock smooth bed without glue. Generally low speeds especially on the first layer. I haven't had any problems so far.

    Translated from Greek ·
    Did you find this review helpful?
  • Ilias_Lamprou64
    4
    1 out of 1 members found this review helpful

    Verified purchase

    This review is about the colour: Blue

    While the orange and white colors I tried print very well with the blue, I haven't managed to make any proper prints despite experimenting with different temperatures. Basically, the flow is intermittent and doesn't leave a continuous line. I tried on two different printers and got the same results. Changing the filament to another color works perfectly. I don't know if I happened to get a problematic batch or if the color added is indeed the issue.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Red

    smoth extrusion

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Orange

    Perfect filament

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Red

    You can't really call it red...

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Orange

    excellent quality. nice result.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Multicolour

    Very good. Printed well.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Red

    Very easy to print

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Orange

    Honest purchase!

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Blue

    Honest for its price.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Red

    Honest for its price.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Blue

    Nice print without difficulties with the basic settings I use for pla on the Ender3 v2.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Grey

    Good thread, especially for the price

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Orange

  • Verified purchase

    This review is about the colour: Black

  • Verified purchase

    This review is about the colour: Multicolour

  • This review is about the colour: Red

  • Verified purchase

    This review is about the colour: Multicolour

  • Verified purchase

    This review is about the colour: Orange

  • Verified purchase

    This review is about the colour: Orange

  • Verified purchase

  • Verified purchase

    This review is about the colour: Grey

  • This review is about the colour: Black

  • Beautiful prints without faults due to the filament, nice color transitions, as well as the result. Everything I printed for my little one, he was thrilled with the colors (especially the poop emoji). I will choose it again!

    Translated from Greek ·
    1
  • As a material OK I had no problem like all the others but as a color it's definitely not red, it's a bit darker than orange and quite a bit lighter than red. I would call it Coral

    Translated from Greek ·
    1
  • For its price, excellent! (I got it for €12) ...I had no problems! Personal recommendation to everyone, just make sure it hasn't absorbed moisture from the factory - otherwise, do a drying and it will be fine.

    In general, 3/3 spools, all prints were perfect, neither warping nor shrinking

    Translated from Greek ·
    1
  • It is PLA+, which means it is a bit different from regular PLA. It took quite a bit of effort to print it on the Ender 3 V3 KE. The layers would separate from each other or the first layer would detach. I searched on Reddit and others had similar experiences, and generally, you need to tweak the cooling. The settings I used that seemed to work and finally allowed me to print what I wanted were:

    • For the first 3 layers, have no cooling
    • For all subsequent layers, have the fans running at 50 to 60% of their power.

    It might matter that my printer is open-type and not enclosed. However, with the equivalent eSun PLA+ filaments, I don't have any issues.

    Translated from Greek ·
    0
  • The shade is light blue, a lighter color than in the photo. It arrived with a lot of moisture and needed drying.

    Translated from Greek ·
    0
  • See all

Description & Specifications

Creality EN PLA+ filament for 3D printers offers greater break resistance than standard PLA. EPC winding technology and precise diameter control help ensure smooth feeding and extrusion, while high-purity raw materials contribute to consistent printing. Tested with Creality printers.

  • Material: PLA+
  • Color: Green
  • Filament diameter: 1.75 mm
  • Weight: 1 kg
  • Quantity: 1 piece
  • Packaging: Spool
  • Winding technology: EPC
  • Extruder temperature: 190–230 °C
  • Heated bed temperature: Unheated to 60 °C
  • Print speed: 40–100 mm/s
  • Tensile strength: 34 MPa
  • Flexural strength: 77 MPa

Manufacturer

Product Number
3301010313
Material
PLA+
Colour
Green
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (102)

  1. 86
  2. 12
  3. 3
  4. 1
  5. 1 star
    0
Review this product

What do users say? AI-generated summary

Overall, users consider the filament good quality and easy to print with, producing attractive results. They report smooth printing with standard PLA settings and good value for money. However, some experienced moisture issues that required drying, or difficulties with adhesion and flow, while some shades differ from expectations.

  • MoiraDawn
    5
    1 out of 1 members found this review helpful

    Verified purchase

    This review is about the colour: Multicolour

    Beautiful prints without faults due to the filament, nice color transitions, as well as the result. Everything I printed for my little one, he was thrilled with the colors (especially the poop emoji). I will choose it again!

    Translated from Greek ·
    Did you find this review helpful?
  • sotris165
    3
    1 out of 1 members found this review helpful

    Verified purchase

    This review is about the colour: Red

    As a material OK I had no problem like all the others but as a color it's definitely not red, it's a bit darker than orange and quite a bit lighter than red. I would call it Coral

    Translated from Greek ·
    Did you find this review helpful?
  • pavlandr1
    5
    1 out of 1 members found this review helpful

    Verified purchase

    This review is about the colour: Black

    For its price, excellent! (I got it for €12) ...I had no problems! Personal recommendation to everyone, just make sure it hasn't absorbed moisture from the factory - otherwise, do a drying and it will be fine.

    In general, 3/3 spools, all prints were perfect, neither warping nor shrinking

    Translated from Greek ·
    Did you find this review helpful?
  • HaruTzuki
    3
    0 out of 1 members found this review helpful

    Verified purchase

    This review is about the colour: Orange

    It is PLA+, which means it is a bit different from regular PLA. It took quite a bit of effort to print it on the Ender 3 V3 KE. The layers would separate from each other or the first layer would detach. I searched on Reddit and others had similar experiences, and generally, you need to tweak the cooling. The settings I used that seemed to work and finally allowed me to print what I wanted were:

    • For the first 3 layers, have no cooling
    • For all subsequent layers, have the fans running at 50 to 60% of their power.

    It might matter that my printer is open-type and not enclosed. However, with the equivalent eSun PLA+ filaments, I don't have any issues.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Blue

    The shade is light blue, a lighter color than in the photo. It arrived with a lot of moisture and needed drying.

    Translated from Greek ·
    Did you find this review helpful?
  • Yanjo3DPrints
    4
    2 out of 2 members found this review helpful

    Verified purchase

    This review is about the colour: Multicolour

    Good material, I work quite a bit with ombre in general so I worked it a lot. It is more glossy than the rest of the Ender series. 4 stars because for a period it made me experience clogs. It requires slightly more temperature than usual. Overall good adhesion and result. Not the best I've seen, but quite good.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Red

    While most of the Ender series were decent, the "red" is not red and as a material it drips a lot. It was used on Ender 3 S1.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Black

    Good and easy material. I print on Ender 3 S1 - Nozzle 195 first 200-205 later & Bed 60-70 depending on the size of the file that touches the bed. I have the stock smooth bed without glue. Generally low speeds especially on the first layer. I haven't had any problems so far.

    Translated from Greek ·
    Did you find this review helpful?
  • Ilias_Lamprou64
    4
    1 out of 1 members found this review helpful

    Verified purchase

    This review is about the colour: Blue

    While the orange and white colors I tried print very well with the blue, I haven't managed to make any proper prints despite experimenting with different temperatures. Basically, the flow is intermittent and doesn't leave a continuous line. I tried on two different printers and got the same results. Changing the filament to another color works perfectly. I don't know if I happened to get a problematic batch or if the color added is indeed the issue.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Red

    smoth extrusion

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Orange

    Perfect filament

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Red

    You can't really call it red...

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Orange

    excellent quality. nice result.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Multicolour

    Very good. Printed well.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Red

    Very easy to print

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Orange

    Honest purchase!

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Blue

    Honest for its price.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Red

    Honest for its price.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Blue

    Nice print without difficulties with the basic settings I use for pla on the Ender3 v2.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the colour: Grey

    Good thread, especially for the price

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the colour: Orange

  • Verified purchase

    This review is about the colour: Black

  • Verified purchase

    This review is about the colour: Multicolour

  • This review is about the colour: Red

  • Verified purchase

    This review is about the colour: Multicolour

  • Verified purchase

    This review is about the colour: Orange

  • Verified purchase

    This review is about the colour: Orange

  • Verified purchase

  • Verified purchase

    This review is about the colour: Grey

  • This review is about the colour: Black

  • Beautiful prints without faults due to the filament, nice color transitions, as well as the result. Everything I printed for my little one, he was thrilled with the colors (especially the poop emoji). I will choose it again!

    Translated from Greek ·
    1
  • As a material OK I had no problem like all the others but as a color it's definitely not red, it's a bit darker than orange and quite a bit lighter than red. I would call it Coral

    Translated from Greek ·
    1
  • For its price, excellent! (I got it for €12) ...I had no problems! Personal recommendation to everyone, just make sure it hasn't absorbed moisture from the factory - otherwise, do a drying and it will be fine.

    In general, 3/3 spools, all prints were perfect, neither warping nor shrinking

    Translated from Greek ·
    1
  • It is PLA+, which means it is a bit different from regular PLA. It took quite a bit of effort to print it on the Ender 3 V3 KE. The layers would separate from each other or the first layer would detach. I searched on Reddit and others had similar experiences, and generally, you need to tweak the cooling. The settings I used that seemed to work and finally allowed me to print what I wanted were:

    • For the first 3 layers, have no cooling
    • For all subsequent layers, have the fans running at 50 to 60% of their power.

    It might matter that my printer is open-type and not enclosed. However, with the equivalent eSun PLA+ filaments, I don't have any issues.

    Translated from Greek ·
    0
  • The shade is light blue, a lighter color than in the photo. It arrived with a lot of moisture and needed drying.

    Translated from Greek ·
    0
  • See all
11,29 €
14,00 €   shipping cost