PoE Adapters

Extralink PoE+ Injector EX.14671

The Extralink EX.14671 PoE+ injector transmits power over CAT5e, CAT6 or CAT6A Ethernet cable on 10/100/1000 Mbps networks. It accepts 10–30 V power via a 5.5/2.1 mm DC jack or through pins 4,5 (+)...

The Extralink EX.14671 PoE+ injector transmits power over CAT5e, CAT6 or CAT6A Ethernet cable on 10/100/1000 Mbps networks. It accepts 10–30 V power via a 5.5/2.1 mm DC jack or through pins 4,5 (+) and 7,8 () of the RJ45 plug, and delivers a 48 V output. When powered via the DC jack, the power is isolated from the male RJ45 plug, allowing it to be connected...

See full description See full description
23 90 €
Delivery Wed, 11 Nov - Tue, 17 Nov
14,00 €   shipping cost
Sent from Greece
From Getters 4.6 (112)
Greece
20+ pieces
See Networking on the page of Getters

Learn more about invoicing

Description

Description

The Extralink EX.14671 PoE+ injector transmits power over CAT5e, CAT6 or CAT6A Ethernet cable on 10/100/1000 Mbps networks. It accepts 10–30 V power via a 5.5/2.1 mm DC jack or through pins 4,5 (+) and 7,8 (−) of the RJ45 plug, and delivers a 48 V output. When powered via the DC jack, the power is isolated from the male RJ45 plug, allowing it to be connected to a switch or router.

The 48 V output is supplied on pins 3,6 (+) and 1,2 (−) of the female RJ45 port to power 802.3af devices. The injector also supports power from a 12 V or 24 V battery and 10–30 V passive PoE.

  • Type: PoE+ injector
  • Standard: IEEE 802.3at
  • LAN speed: 1000 Mbps
  • Input voltage: 10–30 V
  • Output voltage: 48 V
  • Power connector: DC 5.5/2.1 mm
  • Power via RJ45: Pins 4,5 (+) and 7,8 (−)
  • RJ45 output pins: 3,6 (+) and 1,2 (−)
  • Supported cables: CAT5e, CAT6 and CAT6A
  • Compatibility: 802.3af devices

Manufacturer

See full description

Specifications

Specifications

Type
Injector
Standard
PoE+ (IEEE 802.3at)
Passive
-
LAN Speed
1000 Mbps
Output Voltage
48 V

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Extralink EX.14671 PoE+ injector transmits power over CAT5e, CAT6 or CAT6A Ethernet cable on 10/100/1000 Mbps networks. It accepts 10–30 V power via a 5.5/2.1 mm DC jack or through pins 4,5 (+) and 7,8 (−) of the RJ45 plug, and delivers a 48 V output. When powered via the DC jack, the power is isolated from the male RJ45 plug, allowing it to be connected to a switch or router.

The 48 V output is supplied on pins 3,6 (+) and 1,2 (−) of the female RJ45 port to power 802.3af devices. The injector also supports power from a 12 V or 24 V battery and 10–30 V passive PoE.

  • Type: PoE+ injector
  • Standard: IEEE 802.3at
  • LAN speed: 1000 Mbps
  • Input voltage: 10–30 V
  • Output voltage: 48 V
  • Power connector: DC 5.5/2.1 mm
  • Power via RJ45: Pins 4,5 (+) and 7,8 (−)
  • RJ45 output pins: 3,6 (+) and 1,2 (−)
  • Supported cables: CAT5e, CAT6 and CAT6A
  • Compatibility: 802.3af devices

Manufacturer

Type
Injector
Standard
PoE+ (IEEE 802.3at)
Passive
-
LAN Speed
1000 Mbps
Output Voltage
48 V

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

23,90 €
14,00 €   shipping cost