Thick, ready-to-use acrylic plaster is available in 1.5mm. It can be applied to all building materials such as plaster, concrete, cement boards, and gypsum boards. Ideal for both indoor and outdoor use, it can also be applied as a decorative textured finish depending on the application method (troweled or sanded).

The product features high elasticity and excellent adhesion, suitable for final coating in constructions for subsequent thermal insulation of buildings. Certified product according to CE.

COLORS: Available in white and any other shade through the coloring system.

PACKAGING: 25kg

APPLICATION:

• Surfaces must be clean and dry, free from dust, oils, rust, and old peeling paints.
• Mix well before use and avoid applying at temperatures below 6° C and above 40° C, and when relative humidity is greater than 80%.
• The product attains all its mechanical strengths after 20-30 days.
• Tools and hands should be cleaned with water and soap before the plaster dries.
• The product is applied without dilution. If necessary, dilute with water at a rate of 1%.

CAUTION: Wear protective gloves, protective clothing, and personal protective equipment for eyes and face. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy.

CONSUMPTION:

• SANDED WITH STRIPES: 1.5mm - 2.9Kg/m²
• DRYING: 12 - 24 hours depending on application conditions.