Underwater hull paint primer ideal for use in areas below and above the waterline on boats made of polyester, wood, steel, aluminum, and other materials. Provides strong anti-corrosion protection on metal and wooden surfaces as well as powerful anti-osmotic protection on GRP boats.

Surface preparation: The surface must be thoroughly clean and dry at the time of application. The temperature should be above the dew point to prevent moisture condensation. Carefully stir the Part A component and add the Part B component under stirring. After mixing, let the mixture react for 10 minutes. After 6 hours, the mixture cannot be used.

Application: It can be applied with a roller, brush, or airless spray. It dries to the touch in 2 hours at 5°C, 1 hour at 15°C, 40 minutes at 25°C, and 15 minutes at 35°C (wet film thickness 80-120μm).