Application of VELVET ACRYL

• The surface to be painted should be cleaned of dust, grease, oils, flaking old paints, rust, mold residue, or moisture.
• For new or porous surfaces, first apply the corresponding recommended primer of the product.
• Apply the product in 2 coats (after shaking it well), allowing 1 - 2 hours between coats.
• The product achieves all its mechanical strengths after 20 - 30 days.

Dilution

• First coat: 15% water.
• Second coat: 5-10% water.

Conditions for applying VELVET ACRYL

• Avoid applying the product at temperatures below 6°C and above 40°C and when relative humidity is greater than 80%.
• Adverse conditions during application can alter the final properties of the paint.

Application Tools

• Brush
• Roller
• Spray gun

During work, keep the tools "wet" in the container or in the product container. Squeeze the tools well back into the box and immediately clean with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of washing liquids in the groundwater.