Skroutz.mt

Philips Lamps Car Ultinon Pro6000 +230% H7 Canbus LED 5800K Cold White 12V 15W 2pcs
Car Lamps

Philips Lamps Car Ultinon Pro6000 +230% H7 Canbus LED 5800K Cold White 12V 15W 2pcs

Set of H7 type LED car lamps Ultinon Pro6000 +230% by Philips. The type indicates how the lamp is mounted on the vehicle's socket, the number of filaments, and the electrical energy required. Consult...

Set of H7 type LED car lamps Ultinon Pro6000 +230% by Philips. The type indicates how the lamp is mounted on the vehicle's socket, the number of filaments, and the electrical energy required. Consult your vehicle's manual for the correct lamp selection. In this case, it can be installed in the low beams, high beams, and fog lights.


The LED operating...

See full description See full description

  • Technology

    LED

    LED bulbs offer high brightness and excellent energy efficiency, consuming less power compared to traditional bulbs. They are distinguished by their long lifespan and instant response, providing clear and strong visibility even in challenging conditions.

  • Type

    H7

    It is a type of bulb used for front headlights.

  • Power

    Indicates the power consumption of the lamp and is related to its brightness. It should always comply with the vehicle manufacturer's specifications to avoid overloading or malfunctions in the electrical system.

  • Color Temperature

    Colour temperature in lamps refers to how warm or cool the color is. 


    The warmth of light is measured in Kelvin; the lower the Kelvin rating, the more reddish the hues, and the higher the rating, the bluer the hues.


    Indicatively, lights with 3000 Kelvin are usually recommended for fog lights, lights with 4300-5000 Kelvin are usually recommended for driving lights, and from 6000 Kelvin and above are for a more distinctive style.

  • Voltage

    Voltage indicates the electrical current required for a lamp to function properly. Most car lamps operate at 12V, which is the standard voltage for most passenger vehicles. In trucks or heavy vehicles, 24V lamps are usually used.
  • See all
The product is not available at Skroutz Last updated: 5 months ago
Product report

Description

Description

Set of H7 type LED car lamps Ultinon Pro6000 +230% by Philips. The type indicates how the lamp is mounted on the vehicle's socket, the number of filaments, and the electrical energy required. Consult your vehicle's manual for the correct lamp selection. In this case, it can be installed in the low beams, high beams, and fog lights.


The LED operating technology offers greater brightness, and therefore visibility, compared to halogen and Xenon lamps. They are also more durable than halogen lamps and have a higher cost than halogen and Xenon. However, they have an even longer lifespan, which can reach up to 30,000 hours.

They can be connected to a CAN Bus system. This system monitors the consumption of the lamp and recognizes whether it is burnt out or not, sending indications to the dashboard. Before choosing lamps for your vehicle, it is recommended to consult its manual for the minimum consumption needed so that the CAN Bus system does not trigger.

  • Power: 15W
  • Voltage: 12V
  • Color Temperature: 5800K

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Vehicle
Auto
Type
H7

Type

H7

It is a type of bulb used for front headlights.
Bulb Types
LED

Bulb Types

LED

LED bulbs offer high brightness and excellent energy efficiency, consuming less power compared to traditional bulbs. They are distinguished by their long lifespan and instant response, providing clear and strong visibility even in challenging conditions.
Power
15 W

Power

Indicates the power consumption of the lamp and is related to its brightness. It should always comply with the vehicle manufacturer's specifications to avoid overloading or malfunctions in the electrical system.
Colour Temperature
5800 K

Colour Temperature

Colour temperature in lamps refers to how warm or cool the color is. 


The warmth of light is measured in Kelvin; the lower the Kelvin rating, the more reddish the hues, and the higher the rating, the bluer the hues.


Indicatively, lights with 3000 Kelvin are usually recommended for fog lights, lights with 4300-5000 Kelvin are usually recommended for driving lights, and from 6000 Kelvin and above are for a more distinctive style.
Lighting Colour
Cold White
Voltage
12 V

Voltage

Voltage indicates the electrical current required for a lamp to function properly. Most car lamps operate at 12V, which is the standard voltage for most passenger vehicles. In trucks or heavy vehicles, 24V lamps are usually used.
Quantity
2 pcs
Canbus
Yes

Canbus

The bulb's consumption is monitored and the system recognizes if it is burnt out or not, sending indications to the dashboard. Consult your car manual for the minimum consumption required to avoid CAN Bus system failure.
Off Road
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (3)

Reviews

5.0
3
5.0
Review this product
  1. 3
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • Konstadinos
    5
    1 out of 1 members found this review helpful
    Konstadinos
    This review is about a variation of the product

    Installed on a 2017 Audi Q2. No canbus error occurred. Strangely, they are stronger than the factory LED headlights. They have less brightness than the Ultinon access I had before, specifically measured with a photometer at 4m: 1306LUX compared to 1539LUX of the Ultinon access. The access, although cheaper, are a bit brighter, slightly more blue in hue BUT they burn out in less than 12 months and this happened with 3 pairs I bought AND they trigger the canbus when start-stop is activated and the voltage drops in the circuit. Therefore, the access are only suitable for the high beam which is not used often. For the low beam, the Ultinon Pro6000 Boost are the definition of "OEM" and for me the only choice. Plus, they are among the few that are certified for road use.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    george_thomop

    Verified purchase

    This review is about the quantity: 1 pcs

  • 5
    ospyros

    Verified purchase

  • Konstadinos
    5
    Konstadinos

    Installed on a 2017 Audi Q2. No canbus error occurred. Strangely, they are stronger than the factory LED headlights. They have less brightness than the Ultinon access I had before, specifically measured with a photometer at 4m: 1306LUX compared to 1539LUX of the Ultinon access. The access, although cheaper, are a bit brighter, slightly more blue in hue BUT they burn out in less than 12 months and this happened with 3 pairs I bought AND they trigger the canbus when start-stop is activated and the voltage drops in the circuit. Therefore, the access are only suitable for the high beam which is not used often. For the low beam, the Ultinon Pro6000 Boost are the definition of "OEM" and for me the only choice. Plus, they are among the few that are certified for road use.

    Translated from Greek ·
    1
  • 5
    george_thomop

    0
  • 5
    ospyros

    0
  • See all

Description & Specifications

Set of H7 type LED car lamps Ultinon Pro6000 +230% by Philips. The type indicates how the lamp is mounted on the vehicle's socket, the number of filaments, and the electrical energy required. Consult your vehicle's manual for the correct lamp selection. In this case, it can be installed in the low beams, high beams, and fog lights.


The LED operating technology offers greater brightness, and therefore visibility, compared to halogen and Xenon lamps. They are also more durable than halogen lamps and have a higher cost than halogen and Xenon. However, they have an even longer lifespan, which can reach up to 30,000 hours.

They can be connected to a CAN Bus system. This system monitors the consumption of the lamp and recognizes whether it is burnt out or not, sending indications to the dashboard. Before choosing lamps for your vehicle, it is recommended to consult its manual for the minimum consumption needed so that the CAN Bus system does not trigger.

  • Power: 15W
  • Voltage: 12V
  • Color Temperature: 5800K

Manufacturer

Manufacturer Details

Warnings & Safety Information
Vehicle
Auto
Type
H7

Type

H7

It is a type of bulb used for front headlights.
Bulb Types
LED

Bulb Types

LED

LED bulbs offer high brightness and excellent energy efficiency, consuming less power compared to traditional bulbs. They are distinguished by their long lifespan and instant response, providing clear and strong visibility even in challenging conditions.
Power
15 W

Power

Indicates the power consumption of the lamp and is related to its brightness. It should always comply with the vehicle manufacturer's specifications to avoid overloading or malfunctions in the electrical system.
Colour Temperature
5800 K

Colour Temperature

Colour temperature in lamps refers to how warm or cool the color is. 


The warmth of light is measured in Kelvin; the lower the Kelvin rating, the more reddish the hues, and the higher the rating, the bluer the hues.


Indicatively, lights with 3000 Kelvin are usually recommended for fog lights, lights with 4300-5000 Kelvin are usually recommended for driving lights, and from 6000 Kelvin and above are for a more distinctive style.
Lighting Colour
Cold White
Voltage
12 V

Voltage

Voltage indicates the electrical current required for a lamp to function properly. Most car lamps operate at 12V, which is the standard voltage for most passenger vehicles. In trucks or heavy vehicles, 24V lamps are usually used.
Quantity
2 pcs
Canbus
Yes

Canbus

The bulb's consumption is monitored and the system recognizes if it is burnt out or not, sending indications to the dashboard. Consult your car manual for the minimum consumption required to avoid CAN Bus system failure.
Off Road
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (3)

5.0
3
5.0
Review this product
  1. 3
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • Konstadinos
    5
    1 out of 1 members found this review helpful
    Konstadinos
    This review is about a variation of the product

    Installed on a 2017 Audi Q2. No canbus error occurred. Strangely, they are stronger than the factory LED headlights. They have less brightness than the Ultinon access I had before, specifically measured with a photometer at 4m: 1306LUX compared to 1539LUX of the Ultinon access. The access, although cheaper, are a bit brighter, slightly more blue in hue BUT they burn out in less than 12 months and this happened with 3 pairs I bought AND they trigger the canbus when start-stop is activated and the voltage drops in the circuit. Therefore, the access are only suitable for the high beam which is not used often. For the low beam, the Ultinon Pro6000 Boost are the definition of "OEM" and for me the only choice. Plus, they are among the few that are certified for road use.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    george_thomop

    Verified purchase

    This review is about the quantity: 1 pcs

  • 5
    ospyros

    Verified purchase

  • Konstadinos
    5
    Konstadinos

    Installed on a 2017 Audi Q2. No canbus error occurred. Strangely, they are stronger than the factory LED headlights. They have less brightness than the Ultinon access I had before, specifically measured with a photometer at 4m: 1306LUX compared to 1539LUX of the Ultinon access. The access, although cheaper, are a bit brighter, slightly more blue in hue BUT they burn out in less than 12 months and this happened with 3 pairs I bought AND they trigger the canbus when start-stop is activated and the voltage drops in the circuit. Therefore, the access are only suitable for the high beam which is not used often. For the low beam, the Ultinon Pro6000 Boost are the definition of "OEM" and for me the only choice. Plus, they are among the few that are certified for road use.

    Translated from Greek ·
    1
  • 5
    george_thomop

    0
  • 5
    ospyros

    0
  • See all