Skroutz.mt

Pedrollo ZXm 1A/40 Single-phase Pump Waste Water / Sewage 0.85hp 100221
Submersible Water Pumps

Pedrollo ZXm 1A/40 Single-phase Pump Waste Water / Sewage 0.85hp 100221

Key features:

  • Performance: 24000Lit/h
  • Maximum temperature: 40 oC
  • Outlet: 1 1/2’’
  • Power: 635W
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    11

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

Submersible sewage pump from the manufacturer Pedrollo, used for pumping dirty water that may contain particles.

• It has a horsepower of 0.85hp and a power of 630W.

Technical Specifications:

  • Voltage: 220V/50V/Hz
  • Power: 0.85HP
  • Maximum flow rate: 24m3/h
  • Maximum head: 11m
  • Outlet: 1 1/2"
  • Pump body made of stainless steel AISI 304/cast iron
  • Vortex type plastic impeller
  • Pumped liquid temperature up to 40° C
  • Solid passage up to Ø40mm
  • Drainage up to 50mm
  • Single-phase
  • Weight: 11.9Kg
  • Dimensions: 174 x 174 x 378cm

Performances:

  • Head 11m Flow Rate 0m3/h
  • Head 10m Flow Rate 3m3/h
  • Head 9.2m Flow Rate 6m3/h
  • Head 7m Flow Rate 12m3/h
  • Head 4.3m Flow Rate 18m3/h
  • Head 1.5m Flow Rate 24m3/h

Features and Benefits:

  • With built-in float switch for start and stop operation
  • Pump body: technopolymer
  • Impeller: technopolymer
  • Shaft: stainless steel
  • Double mechanical seal: ceramic-graphite-NBR
  • Asynchronous motors
  • IP68 protection
  • Insulation class F
  • Thermal protection of the motor

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.85 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
637.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
Yes

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
11 m

Maximum Head Height: 11


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
24 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Maximum Particle Size
40 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • vespas
    5
    2 out of 2 members found this review helpful
    vespas

    Excellent. Quality construction and durable: at first, I accidentally didn't connect it correctly without getting water and it worked for a long time 'in the air'. It did not overheat and for 5 years now it has been working continuously without any problems.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Spilios_Sklikas

    Very good quality materials

    Translated from Greek ·
    Did you find this review helpful?
  • vespas
    5
    vespas

    Excellent. Quality construction and durable: at first, I accidentally didn't connect it correctly without getting water and it worked for a long time 'in the air'. It did not overheat and for 5 years now it has been working continuously without any problems.

    Translated from Greek ·
    2
  • 5
    Spilios_Sklikas

    Very good quality materials

    Translated from Greek ·
    0
  • See all

Description & Specifications

Submersible sewage pump from the manufacturer Pedrollo, used for pumping dirty water that may contain particles.

• It has a horsepower of 0.85hp and a power of 630W.

Technical Specifications:

  • Voltage: 220V/50V/Hz
  • Power: 0.85HP
  • Maximum flow rate: 24m3/h
  • Maximum head: 11m
  • Outlet: 1 1/2"
  • Pump body made of stainless steel AISI 304/cast iron
  • Vortex type plastic impeller
  • Pumped liquid temperature up to 40° C
  • Solid passage up to Ø40mm
  • Drainage up to 50mm
  • Single-phase
  • Weight: 11.9Kg
  • Dimensions: 174 x 174 x 378cm

Performances:

  • Head 11m Flow Rate 0m3/h
  • Head 10m Flow Rate 3m3/h
  • Head 9.2m Flow Rate 6m3/h
  • Head 7m Flow Rate 12m3/h
  • Head 4.3m Flow Rate 18m3/h
  • Head 1.5m Flow Rate 24m3/h

Features and Benefits:

  • With built-in float switch for start and stop operation
  • Pump body: technopolymer
  • Impeller: technopolymer
  • Shaft: stainless steel
  • Double mechanical seal: ceramic-graphite-NBR
  • Asynchronous motors
  • IP68 protection
  • Insulation class F
  • Thermal protection of the motor

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.85 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
637.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
Yes

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
11 m

Maximum Head Height: 11


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
24 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Maximum Particle Size
40 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • vespas
    5
    2 out of 2 members found this review helpful
    vespas

    Excellent. Quality construction and durable: at first, I accidentally didn't connect it correctly without getting water and it worked for a long time 'in the air'. It did not overheat and for 5 years now it has been working continuously without any problems.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Spilios_Sklikas

    Very good quality materials

    Translated from Greek ·
    Did you find this review helpful?
  • vespas
    5
    vespas

    Excellent. Quality construction and durable: at first, I accidentally didn't connect it correctly without getting water and it worked for a long time 'in the air'. It did not overheat and for 5 years now it has been working continuously without any problems.

    Translated from Greek ·
    2
  • 5
    Spilios_Sklikas

    Very good quality materials

    Translated from Greek ·
    0
  • See all