Skroutz.mt

ProCraft Impact Rotary Hammer Power 1400W with SDS Plus Socket BH1400
Rotary Hammers

ProCraft Impact Rotary Hammer Power 1400W with SDS Plus Socket BH1400

Key features:

  • Maximum Motor Speed: 900rpm
  • Impact Energy: 3Joule
  • Maximum Number of Impacts: 4000bpm
  • Power: 1400W
See full description
  • Item Excavator

  • Impact Energy

    The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

    2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.

    3

    For casual amateur use, 2 to 4 Joules are considered sufficient.

  • Power

    Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

    2. Impact Energy is another characteristic that shows the "power" of the tool.

    1400

    Machines ranging from 650 to 1500 watts will handle most household tasks. More watts make it easier to work on harder surfaces.

  • Socket

    SDS - SDS Plus (TE-C)

    SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.

  • Speed Setting

    1

    Ability to control the rotation speed, either through the trigger or via a speed selector.

  • Maximum Number of Impacts

    The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

    2.

    Note that the Impact Energy is also important for performance, indicating the force of each strike.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

At a glance

Rotary hammer from ProCraft company with 1400Watt power. It also features an SDS - SDS Plus (TE-C) chuck for better performance in rotary hammering operations compared to others (suitable for working on concrete or stone) and easy drill bit change that can even be done with one hand. Additionally, it has adjustable speed up to 900rpm to be adjusted according to the work you want to do and anti-lock protection to prevent injuries in case the tool gets stuck while using it on a hard material.

Capabilities & Features

  • SDS+ chuck
  • Operating switch
  • Front and rear handle with control buttons
  • Made of high-quality, durable plastic 
  • 3 usage modes - conventional drilling, great for drilling wood and metal - hammer, essential for demolition of high-strength materials, disassembly - rotary hammer, designed for drilling into concrete, bricks, stone, and fresh concrete.

Technical Specifications

  • Maximum Motor Speed: 900rpm
  • Impact Energy: 3Joule
  • Maximum Number of Strikes: 4000bpm
  • Power: 1400W
  • Voltage: 230V
  • SDS Plus Chuck

Includes

  • Handle
  • Drill
  • Chisel
  • Depth guide


Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Power Source
Electric
Type
Excavator

Battery Specifications

Lithium
No

Current Specifications

Power
1400 W

Power: 1400

Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

2. Impact Energy is another characteristic that shows the "power" of the tool.


Machines ranging from 650 to 1500 watts will handle most household tasks. More watts make it easier to work on harder surfaces.

Features

Maximum Motor Speed
900 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
3 Joule

Impact Energy: 3

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
4000 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
No
Pneumatic
No
Speed Adjustable
Yes

Speed Adjustable


Ability to control the rotation speed, either through the trigger or via a speed selector.
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Handle included
Yes
Integrated Light
No
Guide
No
Net Weight
4000 gr

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

Rotary hammer from ProCraft company with 1400Watt power. It also features an SDS - SDS Plus (TE-C) chuck for better performance in rotary hammering operations compared to others (suitable for working on concrete or stone) and easy drill bit change that can even be done with one hand. Additionally, it has adjustable speed up to 900rpm to be adjusted according to the work you want to do and anti-lock protection to prevent injuries in case the tool gets stuck while using it on a hard material.

Capabilities & Features

  • SDS+ chuck
  • Operating switch
  • Front and rear handle with control buttons
  • Made of high-quality, durable plastic 
  • 3 usage modes - conventional drilling, great for drilling wood and metal - hammer, essential for demolition of high-strength materials, disassembly - rotary hammer, designed for drilling into concrete, bricks, stone, and fresh concrete.

Technical Specifications

  • Maximum Motor Speed: 900rpm
  • Impact Energy: 3Joule
  • Maximum Number of Strikes: 4000bpm
  • Power: 1400W
  • Voltage: 230V
  • SDS Plus Chuck

Includes

  • Handle
  • Drill
  • Chisel
  • Depth guide


Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Power Source
Electric
Type
Excavator

Battery Specifications

Lithium
No

Current Specifications

Power
1400 W

Power: 1400

Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

2. Impact Energy is another characteristic that shows the "power" of the tool.


Machines ranging from 650 to 1500 watts will handle most household tasks. More watts make it easier to work on harder surfaces.

Features

Maximum Motor Speed
900 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
3 Joule

Impact Energy: 3

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
4000 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
No
Pneumatic
No
Speed Adjustable
Yes

Speed Adjustable


Ability to control the rotation speed, either through the trigger or via a speed selector.
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Handle included
Yes
Integrated Light
No
Guide
No
Net Weight
4000 gr

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.