Skroutz.mt

PrimaCreator Value Uv Dlp Resin for 3D Printer Gray 1000ml (PV-RESIN-B405-1000-NG)
3D Printer Resin

PrimaCreator Value Uv Dlp Resin for 3D Printer Gray 1000ml (PV-RESIN-B405-1000-NG)

PrimaCreator Value UV/DLP resin is designed for UV-LED and DLP 3D printers with a wavelength of 395–405 nm. Its fast curing supports short print times, while post-print curing in a UV chamber or...

PrimaCreator Value UV/DLP resin is designed for UV-LED and DLP 3D printers with a wavelength of 395–405 nm. Its fast curing supports short print times, while post-print curing in a UV chamber or sunlight is required.

After printing, clean the objects with isopropyl alcohol (IPA) to remove excess resin. Full curing takes approximately 2–5 minutes in a UV...

See full description See full description
31 43 €
Delivery by Wed, 11 Nov
14,00 €   shipping cost
Sent from Greece
From Top Electronics 4.9 (39)
4.9 (39 reviews)
Greece
5 pieces
See Printer Supplies on the page of Top Electronics

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

PrimaCreator Value UV/DLP resin is designed for UV-LED and DLP 3D printers with a wavelength of 395–405 nm. Its fast curing supports short print times, while post-print curing in a UV chamber or sunlight is required.

After printing, clean the objects with isopropyl alcohol (IPA) to remove excess resin. Full curing takes approximately 2–5 minutes in a UV chamber or 10–20 minutes in sunlight; in cloudy conditions, it may take up to 60 minutes. Store the resin away from light at a temperature of 5–40 °C.

  • Type: UV/DLP
  • Color: Gray
  • Capacity: 1000 ml
  • Compatibility: PrimaCreator, Wanhao
  • Wavelength: 395–405 nm
  • Viscosity: 100–150 mPa·s at 25 °C
  • Density: 1.05–1.13 g/cm³
  • Hardness: 85–88 Shore D
  • Tensile strength: 42 MPa
  • Flexural strength: 60 MPa
  • Elongation at break: 10%
  • Storage temperature: 5–40 °C
  • Storage conditions: Protect from light

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Compatibility
PrimaCreator, Wanhao
Colour
Grey
Weight
-
Capacity
1000 ml
Resin Type
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

PrimaCreator Value UV/DLP resin is designed for UV-LED and DLP 3D printers with a wavelength of 395–405 nm. Its fast curing supports short print times, while post-print curing in a UV chamber or sunlight is required.

After printing, clean the objects with isopropyl alcohol (IPA) to remove excess resin. Full curing takes approximately 2–5 minutes in a UV chamber or 10–20 minutes in sunlight; in cloudy conditions, it may take up to 60 minutes. Store the resin away from light at a temperature of 5–40 °C.

  • Type: UV/DLP
  • Color: Gray
  • Capacity: 1000 ml
  • Compatibility: PrimaCreator, Wanhao
  • Wavelength: 395–405 nm
  • Viscosity: 100–150 mPa·s at 25 °C
  • Density: 1.05–1.13 g/cm³
  • Hardness: 85–88 Shore D
  • Tensile strength: 42 MPa
  • Flexural strength: 60 MPa
  • Elongation at break: 10%
  • Storage temperature: 5–40 °C
  • Storage conditions: Protect from light

Manufacturer

Manufacturer Details

Warnings & Safety Information
Compatibility
PrimaCreator, Wanhao
Colour
Grey
Weight
-
Capacity
1000 ml
Resin Type
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

31,43 €
14,00 €   shipping cost