Skroutz.mt

Teltonika TAP200 Access Point Wi‑Fi 4 Dual Band (2.4 & 5GHz) White
Access Points

Teltonika TAP200 Access Point Wi‑Fi 4 Dual Band (2.4 & 5GHz) White

Teltonika TAP200

  • Maximum data transfer rate: 867 Mbit/s
  • Maximum data transfer rate (2.4 GHz): 300 Mbit/s
  • Ethernet LAN data rates: 10, 100, 1000 Mbit/s
  • Security algorithm support: AES-CCMP, TKIP,...

Teltonika TAP200

  • Maximum data transfer rate: 867 Mbit/s
  • Maximum data transfer rate (2.4 GHz): 300 Mbit/s
  • Ethernet LAN data rates: 10, 100, 1000 Mbit/s
  • Security algorithm support: AES-CCMP, TKIP, WPA-PSK, WPA2-EAP, WPA2-PSK, WPA3-EAP, WPA3-SAE
  • WAN port: Ethernet (RJ-45)
  • Supported Power over Ethernet (PoE) type: Active PoE
  • DC voltage range: 44 - 57 V
  • Power...
See full description See full description

Top specs

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.

  • Wi-Fi Generation

    Wi‑Fi 4

    Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

    For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Teltonika TAP200

  • Maximum data transfer rate: 867 Mbit/s
  • Maximum data transfer rate (2.4 GHz): 300 Mbit/s
  • Ethernet LAN data rates: 10, 100, 1000 Mbit/s
  • Security algorithm support: AES-CCMP, TKIP, WPA-PSK, WPA2-EAP, WPA2-PSK, WPA3-EAP, WPA3-SAE
  • WAN port: Ethernet (RJ-45)
  • Supported Power over Ethernet (PoE) type: Active PoE
  • DC voltage range: 44 - 57 V
  • Power consumption (max): 2 W
  • Mounting: Ceiling, Wall
  • Product color: White
  • Housing material: Plastic
  • International Protection (IP) code: IP30
  • Antenna type: Internal
  • Processor frequency: 880 MHz
  • Flash memory: 16 MB
  • Internal memory: 256 MB
  • Width: 158 mm
  • Depth: 30 mm
  • Height: 158 mm
  • Weight: 190 g
  • Operating humidity range: 10 - 90%
  • Operating temperature range: -40 - 75°C

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
867 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
4.9 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Teltonika TAP200

  • Maximum data transfer rate: 867 Mbit/s
  • Maximum data transfer rate (2.4 GHz): 300 Mbit/s
  • Ethernet LAN data rates: 10, 100, 1000 Mbit/s
  • Security algorithm support: AES-CCMP, TKIP, WPA-PSK, WPA2-EAP, WPA2-PSK, WPA3-EAP, WPA3-SAE
  • WAN port: Ethernet (RJ-45)
  • Supported Power over Ethernet (PoE) type: Active PoE
  • DC voltage range: 44 - 57 V
  • Power consumption (max): 2 W
  • Mounting: Ceiling, Wall
  • Product color: White
  • Housing material: Plastic
  • International Protection (IP) code: IP30
  • Antenna type: Internal
  • Processor frequency: 880 MHz
  • Flash memory: 16 MB
  • Internal memory: 256 MB
  • Width: 158 mm
  • Depth: 30 mm
  • Height: 158 mm
  • Weight: 190 g
  • Operating humidity range: 10 - 90%
  • Operating temperature range: -40 - 75°C

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
867 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
4.9 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.