Skroutz.mt

Grundfos Sololift2 WC-3 Single-phase Pump Waste Water / Sewage 0.81hp 97775315
Submersible Water Pumps

Grundfos Sololift2 WC-3 Single-phase Pump Waste Water / Sewage 0.81hp 97775315

Key features:

  • Maximum temperature: 50 °C
  • Cable length: 1.2m
  • Head: 8.5m
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    8.5

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all

User Manual

The product is not available for shipping to the selected country.
Product report

Description

Description

The Grundfos SOLOLIFT2 is a small, ready-to-install automatic lifting station with a powerful built-in cutting system. It is suitable for pumping wastewater with sewage from private residences (1 toilet and 1 sink). The unit is designed according to EN 12050-3.

Suitable for

  • Dirty water from commercial buildings
  • Dirty water from domestic use
  • Industrial dirty water

Specifications

  • Maximum head: 8.5 m
  • Approvals on the nameplate: CE, TR, VDEEMV, VDE, MORO
  • Curve tolerance ISO9906: 2012 3B
  • Container: Plastic
  • Pump inlet: 32/36/40, 36/40/50, DN 100
  • Pump outlet: 22/25/28/32/36/40
  • Number of conductors: 3X0.75MM2
  • Maximum liquid temperature: 50 °C
  • Density: 998.2 kg/m³
  • Input power - P1: 620 W
  • Network frequency: 50 Hz
  • Nominal voltage: 1 x 220-240 V
  • Nominal current: 3 A
  • Power factor - cos phi: 0.92
  • Nominal speed: 2800 rpm
  • Protection degree (IEC 34-5): IP44
  • Insulation class (IEC 85): F
  • Thermal protection: THERMIK S06-150-05
  • Cable length: 1.2 m
  • Cable type: H05VV-F-3G
  • Cable type with plug: shuko
  • Net weight: 7.74 kg
  • Gross weight: 9.27 kg

Features

  • Ready for installation
  • High reliability thanks to the cutter and high-efficiency motor
  • Ability to pump accidentally discarded feminine hygiene items
  • Quick, easy, and clean service – no need to remove the unit from the installation
  • All relevant service parts are dry and clean – not submerged in a tank
  • Easily accessible level switch units, accessible only for maintenance
  • High-strength tank, no leakage in case of level rise
  • Odor-free due to the ventilation valve with activated carbon filter
  • Resistant to hot water up to 90°C for 30 minutes
  • Extremely compact design
  • Low starting levels make the use of modern, flat shower bases possible
  • Selectable outlet direction (top and side)
  • Height-adjustable inlet connectors facilitate installation and replacement
  • Option for up to 4 inlet pipe connections and 6 pressure pipe connections
  • All units are LGA, VDE, EMC, and GOST approved

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.81 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
607.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
6 m
Motor Rotation Speed
2800 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
Yes

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8.5 m

Maximum Head Height: 8.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
8 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
6 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP44

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

The Grundfos SOLOLIFT2 is a small, ready-to-install automatic lifting station with a powerful built-in cutting system. It is suitable for pumping wastewater with sewage from private residences (1 toilet and 1 sink). The unit is designed according to EN 12050-3.

Suitable for

  • Dirty water from commercial buildings
  • Dirty water from domestic use
  • Industrial dirty water

Specifications

  • Maximum head: 8.5 m
  • Approvals on the nameplate: CE, TR, VDEEMV, VDE, MORO
  • Curve tolerance ISO9906: 2012 3B
  • Container: Plastic
  • Pump inlet: 32/36/40, 36/40/50, DN 100
  • Pump outlet: 22/25/28/32/36/40
  • Number of conductors: 3X0.75MM2
  • Maximum liquid temperature: 50 °C
  • Density: 998.2 kg/m³
  • Input power - P1: 620 W
  • Network frequency: 50 Hz
  • Nominal voltage: 1 x 220-240 V
  • Nominal current: 3 A
  • Power factor - cos phi: 0.92
  • Nominal speed: 2800 rpm
  • Protection degree (IEC 34-5): IP44
  • Insulation class (IEC 85): F
  • Thermal protection: THERMIK S06-150-05
  • Cable length: 1.2 m
  • Cable type: H05VV-F-3G
  • Cable type with plug: shuko
  • Net weight: 7.74 kg
  • Gross weight: 9.27 kg

Features

  • Ready for installation
  • High reliability thanks to the cutter and high-efficiency motor
  • Ability to pump accidentally discarded feminine hygiene items
  • Quick, easy, and clean service – no need to remove the unit from the installation
  • All relevant service parts are dry and clean – not submerged in a tank
  • Easily accessible level switch units, accessible only for maintenance
  • High-strength tank, no leakage in case of level rise
  • Odor-free due to the ventilation valve with activated carbon filter
  • Resistant to hot water up to 90°C for 30 minutes
  • Extremely compact design
  • Low starting levels make the use of modern, flat shower bases possible
  • Selectable outlet direction (top and side)
  • Height-adjustable inlet connectors facilitate installation and replacement
  • Option for up to 4 inlet pipe connections and 6 pressure pipe connections
  • All units are LGA, VDE, EMC, and GOST approved

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.81 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
607.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
6 m
Motor Rotation Speed
2800 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
Yes

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8.5 m

Maximum Head Height: 8.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
8 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
6 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP44

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product