Skroutz.mt

LED Strip LED Light Digital 12V Warm White Light 1.2m Type SMD2835 with Motion Sensor & Power Supply
LED Strips

LED Strip LED Light Digital 12V Warm White Light 1.2m Type SMD2835 with Motion Sensor & Power Supply Code: 500001

Feel secure at night with the LED Light Digital Sensor. When your foot touches the floor, the room gently lights up to guide you safely.

Features of the LED Light Digital Sensor:

  • Long lifespan: up to...

Feel secure at night with the LED Light Digital Sensor. When your foot touches the floor, the room gently lights up to guide you safely.

Features of the LED Light Digital Sensor:

  • Long lifespan: up to 10 years with average activation (1 hour per day).
  • Subtle lighting: warm soft glow, without harsh light noise.
  • Easy installation: installs in minutes with...
See full description See full description

  • Power Supply

    The power supply concerns the voltage of the current that the LED strip must have.

    2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

    12V

    The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.

  • Protection certification

    "It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

    IP20

    LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.

  • Light Shade

    Warm White

    The warm white is measured in Kelvin scale with values ranging from 2400K to 3000K. The tones of white are more yellowish compared to natural light.
  • See all
Review the product
Product report

Description

Description

Feel secure at night with the LED Light Digital Sensor. When your foot touches the floor, the room gently lights up to guide you safely.

Features of the LED Light Digital Sensor:

  • Long lifespan: up to 10 years with average activation (1 hour per day).
  • Subtle lighting: warm soft glow, without harsh light noise.
  • Easy installation: installs in minutes with adhesive tape, no tools required.
  • Low power consumption: LED consuming up to 7.5 W, providing the same light as a 25W incandescent bulb.

Technical parameters:

  • Operating temperature: -20~+40℃
  • Operating humidity: 10%-80%
  • Total LED: 36
  • Power: 7.5W
  • Input voltage: DC12V

Package contents:

  • 1x 12V Power Supply
  • 1x Digital Sensor
  • 1x 1.2m LED Strip

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
500001

Dimensions

Length
1.2 m
Power Source
12V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

12V

The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.
Light Colour
Warm White

Light Colour

Warm White

The warm white is measured in Kelvin scale with values ranging from 2400K to 3000K. The tones of white are more yellowish compared to natural light.
White Temperature
3000 K
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
Contents
Power Supply, Motion Sensor
USB
No

Additional Features

LED type
SMD2835

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD2835
It is a 2.8mm wide and 3.5mm long led type. They are suitable for indoor lighting. The 2835s are brighter than the 3528s and can provide much more light.
LED Density
36 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
7.5 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Feel secure at night with the LED Light Digital Sensor. When your foot touches the floor, the room gently lights up to guide you safely.

Features of the LED Light Digital Sensor:

  • Long lifespan: up to 10 years with average activation (1 hour per day).
  • Subtle lighting: warm soft glow, without harsh light noise.
  • Easy installation: installs in minutes with adhesive tape, no tools required.
  • Low power consumption: LED consuming up to 7.5 W, providing the same light as a 25W incandescent bulb.

Technical parameters:

  • Operating temperature: -20~+40℃
  • Operating humidity: 10%-80%
  • Total LED: 36
  • Power: 7.5W
  • Input voltage: DC12V

Package contents:

  • 1x 12V Power Supply
  • 1x Digital Sensor
  • 1x 1.2m LED Strip

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information
Product Number
500001

Dimensions

Length
1.2 m
Power Source
12V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

12V

The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.
Light Colour
Warm White

Light Colour

Warm White

The warm white is measured in Kelvin scale with values ranging from 2400K to 3000K. The tones of white are more yellowish compared to natural light.
White Temperature
3000 K
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
Contents
Power Supply, Motion Sensor
USB
No

Additional Features

LED type
SMD2835

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD2835
It is a 2.8mm wide and 3.5mm long led type. They are suitable for indoor lighting. The 2835s are brighter than the 3528s and can provide much more light.
LED Density
36 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
7.5 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

14,45 €
14,00 €   shipping cost