Description: It is applied to kitchen and bathroom wall tiles on surfaces made of wood, plaster, cement, concrete, brick, on drywall, steel, galvanized iron, aluminum, copper, brass, glass, and PVC. It can be repainted after some time without altering its properties. For indoor and outdoor use.

Technical specifications:

• Finish: Satin
• Color: White
• Coverage: 10-15 m²/L
• Recommended thickness: 100-150 microns (humidity 60-90 microns)
• Drying time: 30-60 minutes to the touch at 20°C
• Repainting: 6 hours (plastic), 12 hours (varnish), 24 hours (two-component)
• Dilution / Tool cleaning: Water
• Packagings: 750 ml
• Application tools: Brush, roller, spray gun

General instructions: Mix very well until the product is homogeneous. Do not apply at temperatures below 5 °C or above 35°C. Always apply in well-ventilated areas. The humidity in the environment should be below 80%.

New surfaces: The surface should be in good condition, clean from dust, grease, and other substances. For improved adhesion, you may lightly sand with sandpaper. Conduct a test before application.

Application: For maximum performance on tiles and surfaces made of wood, iron, galvanized, aluminum, PVC, apply two coats of the product. Follow the guidelines indicated for the preparation of new surfaces. Dilution and cleaning: Water, Dilution Rate: Airless spray gun 0-10%, Air mixing gun 0-10%, Airbrush gun 0-10%, Turbo low pressure 0-10%.