Chromodomi Step Latex Base TR emulsion paint is intended for indoor use and creates a velvety finish with excellent coverage and whiteness. It can be applied with a roller, brush or spray gun and is resistant to frequent washing. It contains no ammonia and is certified according to the EN 71-3 standard.
Before application, clean the surface to remove dust, grease, oils, peeling old paint, rust, mould and moisture. Apply a suitable primer first to new or porous surfaces. Apply the paint in two coats, allowing 1–2 hours between coats. It reaches full mechanical resistance after 20–30 days. Do not apply at temperatures below 6 °C or above 40 °C, or at relative humidity above 80%. Clean tools immediately with warm water and soap.
- Use: Indoor
- Quantity: 10 L
- Colour: White
- Finish: Velvety
- Resistance: Resistant to frequent washing
- Ammonia: Ammonia-free
- Certification: EN 71-3
- Application: With a roller, brush or spray gun
- Coats: 2
- Time between coats: 1–2 hours
- Time to full mechanical resistance: 20–30 days
- Application temperature: From 6 °C to 40 °C
- Maximum relative humidity for application: 80%
- Usage
- Interior
- Quantity
- 10 lt
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.