Fuel & Oil Additives

Tec 2000 Engine Flush 375ml

The TEC 2000 Engine Flush is an innovative engine flush that perfectly removes all impurities from the piston ring grooves, shaft channels, and valve lifters.

It eliminates sludge, carbon deposits,...

The TEC 2000 Engine Flush is an innovative engine flush that perfectly removes all impurities from the piston ring grooves, shaft channels, and valve lifters.

It eliminates sludge, carbon deposits, and soot, while thoroughly removing used oil. The flushing process is very important for the care of both cars and motorcycles.

Using the TEC 2000 Engine Flush...

See full description See full description
The product is not available for shipping to the selected country.

Description

Description

The TEC 2000 Engine Flush is an innovative engine flush that perfectly removes all impurities from the piston ring grooves, shaft channels, and valve lifters.

It eliminates sludge, carbon deposits, and soot, while thoroughly removing used oil. The flushing process is very important for the care of both cars and motorcycles.

Using the TEC 2000 Engine Flush ensures:

  • Increased compression in the cylinders.
  • Full oil performance immediately after replacement.
  • Removal of sludge and carbon deposits from all internal engine surfaces.
  • Cleaning of oil channels and piston ring grooves.
  • Silencing of hydraulic valve opening noise.
  • Neutralization of harmful acids in the oil.
  • Indicators of reduced harmful exhaust emissions.

Its formulation contains two types of solvents and hydrocarbon-based lubricants, without kerosene or oil. The TEC 2000 Engine Flush is considered one of the most effective preparations for cleaning the interior of the engine and is easy to use under any conditions.

Manufacturer

See full description

Specifications

Specifications

Type
Engine Cleaner
Compatible Engine
Petrol
Capacity
375 ml

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (4)

Reviews

  1. 3
  2. 4 stars
    0
  3. 3 stars
    0
  4. 1
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • Chris_Keme
    2
    2 out of 2 members found this review helpful

    Verified purchase

    My problem is that the hydraulic valves make noise for a minute and then stop, this specific product is sold for this problem and for engine cleaning, in my case the hydraulic valves continue to make noise after the cleaning.

    Translated from Greek ·
    Did you find this review helpful?
  • ftohos
    5
    2 out of 2 members found this review helpful

    Verified purchase

    I poured 2 into a warm engine with oil temperature at 95 degrees and a capacity of 5.5 liters. The reason was oil consumption, possibly due to soot buildup on the oil rings. 20 minutes of operation and then I changed the oil and filter with good drainage. It seems to work as the reviews on the internet mention. The noise in the lifters also stopped and I saw lower fuel consumption and better pickup due to increased compression. After 1000 km, oil consumption is 0 and the oil is crystal clear.

    Translated from Greek ·
    Did you find this review helpful?
  • kyriakos.koutsouridis
    5
    3 out of 3 members found this review helpful

    Verified purchase

    Personal experience, unfortunately, I don't have a photo before I put it on, but I really threw it in after 20 minutes of having it on and more than it should have, it made a tremendous change, it became beautiful, and of course, the difference was noticeable in its operation, the engine stopped making noise and gained power.. very expensive, I don't know what the others do, but I will buy it again..

    Translated from Greek ·
    Did you find this review helpful?
  • My problem is that the hydraulic valves make noise for a minute and then stop, this specific product is sold for this problem and for engine cleaning, in my case the hydraulic valves continue to make noise after the cleaning.

    Translated from Greek ·
    2
  • I poured 2 into a warm engine with oil temperature at 95 degrees and a capacity of 5.5 liters. The reason was oil consumption, possibly due to soot buildup on the oil rings. 20 minutes of operation and then I changed the oil and filter with good drainage. It seems to work as the reviews on the internet mention. The noise in the lifters also stopped and I saw lower fuel consumption and better pickup due to increased compression. After 1000 km, oil consumption is 0 and the oil is crystal clear.

    Translated from Greek ·
    2
  • Personal experience, unfortunately, I don't have a photo before I put it on, but I really threw it in after 20 minutes of having it on and more than it should have, it made a tremendous change, it became beautiful, and of course, the difference was noticeable in its operation, the engine stopped making noise and gained power.. very expensive, I don't know what the others do, but I will buy it again..

    Translated from Greek ·
    3
  • 0
  • See all

Description & Specifications

The TEC 2000 Engine Flush is an innovative engine flush that perfectly removes all impurities from the piston ring grooves, shaft channels, and valve lifters.

It eliminates sludge, carbon deposits, and soot, while thoroughly removing used oil. The flushing process is very important for the care of both cars and motorcycles.

Using the TEC 2000 Engine Flush ensures:

  • Increased compression in the cylinders.
  • Full oil performance immediately after replacement.
  • Removal of sludge and carbon deposits from all internal engine surfaces.
  • Cleaning of oil channels and piston ring grooves.
  • Silencing of hydraulic valve opening noise.
  • Neutralization of harmful acids in the oil.
  • Indicators of reduced harmful exhaust emissions.

Its formulation contains two types of solvents and hydrocarbon-based lubricants, without kerosene or oil. The TEC 2000 Engine Flush is considered one of the most effective preparations for cleaning the interior of the engine and is easy to use under any conditions.

Manufacturer

Type
Engine Cleaner
Compatible Engine
Petrol
Capacity
375 ml

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (4)

  1. 3
  2. 4 stars
    0
  3. 3 stars
    0
  4. 1
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • Chris_Keme
    2
    2 out of 2 members found this review helpful

    Verified purchase

    My problem is that the hydraulic valves make noise for a minute and then stop, this specific product is sold for this problem and for engine cleaning, in my case the hydraulic valves continue to make noise after the cleaning.

    Translated from Greek ·
    Did you find this review helpful?
  • ftohos
    5
    2 out of 2 members found this review helpful

    Verified purchase

    I poured 2 into a warm engine with oil temperature at 95 degrees and a capacity of 5.5 liters. The reason was oil consumption, possibly due to soot buildup on the oil rings. 20 minutes of operation and then I changed the oil and filter with good drainage. It seems to work as the reviews on the internet mention. The noise in the lifters also stopped and I saw lower fuel consumption and better pickup due to increased compression. After 1000 km, oil consumption is 0 and the oil is crystal clear.

    Translated from Greek ·
    Did you find this review helpful?
  • kyriakos.koutsouridis
    5
    3 out of 3 members found this review helpful

    Verified purchase

    Personal experience, unfortunately, I don't have a photo before I put it on, but I really threw it in after 20 minutes of having it on and more than it should have, it made a tremendous change, it became beautiful, and of course, the difference was noticeable in its operation, the engine stopped making noise and gained power.. very expensive, I don't know what the others do, but I will buy it again..

    Translated from Greek ·
    Did you find this review helpful?
  • My problem is that the hydraulic valves make noise for a minute and then stop, this specific product is sold for this problem and for engine cleaning, in my case the hydraulic valves continue to make noise after the cleaning.

    Translated from Greek ·
    2
  • I poured 2 into a warm engine with oil temperature at 95 degrees and a capacity of 5.5 liters. The reason was oil consumption, possibly due to soot buildup on the oil rings. 20 minutes of operation and then I changed the oil and filter with good drainage. It seems to work as the reviews on the internet mention. The noise in the lifters also stopped and I saw lower fuel consumption and better pickup due to increased compression. After 1000 km, oil consumption is 0 and the oil is crystal clear.

    Translated from Greek ·
    2
  • Personal experience, unfortunately, I don't have a photo before I put it on, but I really threw it in after 20 minutes of having it on and more than it should have, it made a tremendous change, it became beautiful, and of course, the difference was noticeable in its operation, the engine stopped making noise and gained power.. very expensive, I don't know what the others do, but I will buy it again..

    Translated from Greek ·
    3
  • 0
  • See all