GENERAL CHARACTERISTICS

• Solvent-based paint suitable for road, airport, parking lot marking, etc.
• Can be applied on surfaces made of asphalt, concrete, etc.
• Good brightness with resistance over time and use, even under adverse weather conditions.
• Dries quickly so that the surface can be used immediately.
• Dilution: Ready to use, if necessary 5% with VECHRO thinner No.1.
• Painting tools: Roller, brush, or line marking machine.
• Coverage: 1 - 1.5 m²/kg per coat.
• Drying: Surface dry in 15 - 17 minutes, fully dry in 1 hour.
• Colors: Yellow.
• Application conditions: Temperatures 5°C - 35°C and relative humidity below 80%.

APPLICATION INSTRUCTIONS

• The surface must be thoroughly cleaned of foreign bodies and dust.
• Stir well before and during painting, apply in one coat to the desired film thickness.
• Keep tools "wet" inside the container with the paint.
• Drain excess paint from the tools back into the box and clean them with VECHRO thinner No.1.
• After application, securely close the container to keep it in good condition for future use.
• Store in a cool environment, protect the material from frost and exposure to sunlight.

HAZARD

• Liquid and vapor are flammable.
• Suspected of causing fetal harm.
• Causes skin irritation.
• May cause drowsiness or dizziness.
• May cause damage to organs after prolonged or repeated exposure.
• Avoid heat, sparks, open flames, and other ignition sources.
• Use explosion-proof equipment (electrical/ventilation/lighting).
• Do not breathe dust/fumes/gas/droplets/vapors/aerosols.
• In case of skin contact, wash the skin with water/shower.
• Store locked up.
• Dispose of contents/container according to local/national/international regulations.