GENERAL CHARACTERISTICS

• Solvent-based paint suitable for road, airport, parking space marking, etc.
• Can be applied on surfaces made of asphalt, concrete, etc.
• Its brightness has good durability over time and with use.
• Dries quickly for immediate use of the surface.
• Dilution: Ready to use. If needed, 5% with VECHRO thinner No. 1 for application with roller or brush.
• Painting tools: Roller, brush, or line marking machine.
• Coverage: 1 - 1.5 m²/kg per layer.
• Drying: Surface dry in 15 - 17 minutes. Fully dry in 1 hour.
• Shades: Yellow.
• Application conditions: Temperatures 5°C - 35°C and relative humidity below 80%.

APPLICATION INSTRUCTIONS

• Surface preparation: The surface must be thoroughly cleaned of foreign bodies and dust.
• Application: Shake well before and during painting. The paint is applied in one layer at the desired film thickness.
• Cleaning tools: Keep the tools "wet" in the container with paint. Drain the paint from the tools back into the box and clean them with VECHRO thinner No. 1.
• Storage: Seal the container well after application and store in a cool environment, protecting the material from frost and sunlight exposure.

HAZARD

• Liquid and vapors are flammable.
• Suspected of causing harm to the fetus.
• Causes skin irritation.
• May cause drowsiness or dizziness.
• May cause damage to organs after prolonged or repeated exposure.
• Use explosion-proof equipment.
• Do not breathe dust/ fumes/ gases.
• In case of contact with skin, rinse with water/shower.
• Store locked up.
• Dispose of contents/container according to regulations.