Digital car and motorcycle battery charger Foxsur, 12V/5A, 4Ah-100Ah, with battery repair function through pulses. It is recommended to charge batteries in an open and ventilated area. Keep the charger out of reach of children and avoid direct exposure to the sun.

The digital charger can be used to charge various types of batteries (AGM, GEL, EFB, SLA, and Wet) 12V with a capacity from 4Ah to 100Ah. It features summer/winter mode and 3 charging stages: constant current, constant voltage, and float charging. You can leave the charger connected to the battery for extended periods without affecting it.

The switch from summer mode to winter mode is automatic, with the charger detecting ambient temperature and adjusting the charging voltage accordingly. In low-temperature mode (winter), the device automatically increases the charging voltage, while in high-temperature mode (summer), it decreases the voltage to prevent overcharging of the battery.

It can be used to charge discharged and sulfated batteries. Thanks to the temperature sensing function and ventilation capability, the charger automatically adjusts the voltage to the appropriate level. During use, the LCD display shows information about the charging current, charging voltage, temperature, and state of charge as a percentage of the battery.

Protects the battery from overheating, overcharge, short circuit, and reverse polarity. It features a battery repair function via pulses and Switchmode technology. Car batteries are charged in approximately 8 hours, and motorcycle batteries in about 6 hours. The charger's clips are fully insulated.

If you connect the battery to the charger without plugging it into the socket, you can see the battery level and whether it needs charging. If the battery is fully charged, charging will automatically stop. The product is not intended for charging lithium batteries, 24V, or other truck batteries. It is recommended to check the battery capacity before purchasing a charger.

Technical specifications:

• Input Voltage: 100-240V AC, 50-60 Hz
• Rated output power: 12V DC, 5-6A max.
• Minimum battery voltage for use of the charger: 8V
• Thermal protection: 65°C +/- 5°C
• Product certified according to CE, IEC60335, EN61000, EN55014
• Material: ABS
• Charger dimensions: 15 × 8.5 × 6 cm
• Product dimensions with packaging: 22 x 11.5 x 6.5 cm
• Power cord length: 60 cm
• Charge cable length (from charger to clips): 55 cm
• Product weight with packaging: 475 g
• Color: red with black

Usage instructions:

• Check the compatibility of the charger with the type of battery you intend to charge.
• Connect the charger's clips to the battery: the red clip to the positive terminal (+) and the black to the negative (-).
• If the battery is connected incorrectly (reverse polarity), an error message will appear on the display. Ensure that both charging clips are correctly connected to the battery.
• Plug the charger into the socket. The charger will enter charging mode when the red "Charge" indicator light turns on and starts flashing. The display will indicate when charging is complete, and you can unplug the charger from the socket.