Skroutz.mt

Cronus O' Ring KA20 Wall Mounted Electric Single-Phase Instant Water Heater for Bathroom 5.5kW
Instant Water Heaters & Instant Heater Taps

Cronus O' Ring KA20 Wall Mounted Electric Single-Phase Instant Water Heater for Bathroom 5.5kW Code: GEN.18320

With a stable temperature and lower consumption (with inverter features) compared to simple instant water heaters as it uses only the necessary power to heat the water to the desired temperature....

With a stable temperature and lower consumption (with inverter features) compared to simple instant water heaters as it uses only the necessary power to heat the water to the desired temperature. Energy class A

More economical in electricity consumption by 30 to 40% compared to non-electronic instant water heaters and 60 to 70% compared to classic water...

See full description See full description
89 00 €
Delivery by Fri, 07 Aug
14,00 €   shipping cost
Sent from Greece
From Bestprice4u
Greece
1 piece
See Water Heaters on the page of Bestprice4u
Review the product
Product report

Description

Description

With a stable temperature and lower consumption (with inverter features) compared to simple instant water heaters as it uses only the necessary power to heat the water to the desired temperature. Energy class A

More economical in electricity consumption by 30 to 40% compared to non-electronic instant water heaters and 60 to 70% compared to classic water heaters.

The device can operate by automatically reducing its power, measuring inlet-outlet temperature in relation to water flow and using 2 or 5 kW or in between. The operating power and consumption are controlled by the electronic brain according to the temperature and flow of the incoming water, to select exactly the desired temperature and keep it stable.

The selected temperature ranges between 30°C and 55°C, is adjusted with touch buttons, and is displayed on the screen.

Specifications

  • Flow switch – activates the device only when there is water flow.
  • Safety thermostat – protection against overheating.
  • Protection against electric leakage.
  • Inlet temperature sensor: monitors the temperature of the water entering the device.
  • Outlet temperature sensor: monitors the temperature of the water exiting the device.
  • Dimensions: H 29cm – W 19.50 cm – D 8cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
GEN.18320

Product Details

Power Source
Electric Single Phase
Maximum Power
5.5 kW

Maximum Power

The higher the power of the water heater, the faster the water can be heated and therefore the greater the flow of water at the selected temperature.

2. Those with a power of up to 5-6kw are usually used in a sink, while those intended for use in the shower usually have a power greater than 10kw.
Maximum Flow Rate
-
Maximum Temperature
55 °C

Maximum Temperature

As an indication, 38-42 °C degrees are usually used for a hot shower.
Temperature Setting
Degrees °C
Placement
Bathroom
Wall Mounted
Yes
Inverter
No
Remote Control
No

Dimensions

Height
29 cm
Width
19.5 cm
Length
8 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

With a stable temperature and lower consumption (with inverter features) compared to simple instant water heaters as it uses only the necessary power to heat the water to the desired temperature. Energy class A

More economical in electricity consumption by 30 to 40% compared to non-electronic instant water heaters and 60 to 70% compared to classic water heaters.

The device can operate by automatically reducing its power, measuring inlet-outlet temperature in relation to water flow and using 2 or 5 kW or in between. The operating power and consumption are controlled by the electronic brain according to the temperature and flow of the incoming water, to select exactly the desired temperature and keep it stable.

The selected temperature ranges between 30°C and 55°C, is adjusted with touch buttons, and is displayed on the screen.

Specifications

  • Flow switch – activates the device only when there is water flow.
  • Safety thermostat – protection against overheating.
  • Protection against electric leakage.
  • Inlet temperature sensor: monitors the temperature of the water entering the device.
  • Outlet temperature sensor: monitors the temperature of the water exiting the device.
  • Dimensions: H 29cm – W 19.50 cm – D 8cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
GEN.18320

Product Details

Power Source
Electric Single Phase
Maximum Power
5.5 kW

Maximum Power

The higher the power of the water heater, the faster the water can be heated and therefore the greater the flow of water at the selected temperature.

2. Those with a power of up to 5-6kw are usually used in a sink, while those intended for use in the shower usually have a power greater than 10kw.
Maximum Flow Rate
-
Maximum Temperature
55 °C

Maximum Temperature

As an indication, 38-42 °C degrees are usually used for a hot shower.
Temperature Setting
Degrees °C
Placement
Bathroom
Wall Mounted
Yes
Inverter
No
Remote Control
No

Dimensions

Height
29 cm
Width
19.5 cm
Length
8 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

89,00 €
14,00 €   shipping cost