Skroutz.mt

Red Technic RTWA0033 Battery Drill Driver 20V 1x2Ah
Power Drill Drivers & Screwdrivers

Red Technic RTWA0033 Battery Drill Driver 20V 1x2Ah

Key features:

  • 21-stage clutch + drilling
  • Rotation speed: 0-1450rpm
  • Maximum torque: 37Nm
  • Weight: 1.15kg
  • LCD screen
See full description

  • Power Supply

    Battery

    Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
  • Number of Batteries 1

  • Speed Setting

    Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Battery Capacity

    The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Chuck Diameter

    The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
  • See all
Review the product
Product report

Description

Description

The drill driver from Red Technic operates with a 20 Volt battery. It is suitable for both screwing - unscrewing, as well as for drilling holes in wood, metal, and various other construction materials.
It has the ability to adjust the rotation speed depending on the task (low speed for screwing, higher for wall drilling, maximum for concrete drilling).

At a glance

  • Clutch with 21 torque settings for effective screwing of various screw sizes into different types of materials.
  • Two-speed switch that changes the screwdriver's speed range (0-350rpm / 0-1450rpm).
  • LCD screen showing battery charge status and operating mode: Screwing (FWD) / Unscrewing (REV).
  • Equipped with a magnet on the casing, which ensures excellent functionality and ease of use. This magnet is used for the secure storage and holding of bits and screws, without the risk of loss or scattering.
  • Handle made of soft non-slip material, so the device fits securely in your hand and is comfortable to use.
  • The comfort of work is increased by the low weight of the screwdriver (1.15 kg).
  • Possibility of attaching a wrist strap, its use prevents the screwdriver from falling.
  • Additionally, there are indicators on the side of the device that show the battery charge status.

Specifications

  • Maximum battery voltage: 20V
  • Rotations per minute I: 0-350rpm
  • Rotation speed II: 0-1450rpm
  • Maximum torque: 37Nm
  • Handle diameter: 10mm
  • Battery capacity: 2Ah
  • Battery type: lithium-ion
  • LED light
  • LCD screen
  • 21-stage clutch + drilling
  • Battery charging time: 3h
  • Weight of the screwdriver with one battery: 1.15kg (0.85kg + 0.3kg)
  • Weight of the entire set in the case: 2.5kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Number of Batteries
1
Battery Voltage
20 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
2 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

Features & Functions

Maximum Motor Speed
1450 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
37 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Torque Adjustment
No

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Reception
Quick Change
Maximum Chuck Diameter
10 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
1150 gr

Extra Features

Carrying Case
Hard Case

Carrying Case

Hard Case
Delivered with a hard carrying case.
Handle Included
No
Integrated Light
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The drill driver from Red Technic operates with a 20 Volt battery. It is suitable for both screwing - unscrewing, as well as for drilling holes in wood, metal, and various other construction materials.
It has the ability to adjust the rotation speed depending on the task (low speed for screwing, higher for wall drilling, maximum for concrete drilling).

At a glance

  • Clutch with 21 torque settings for effective screwing of various screw sizes into different types of materials.
  • Two-speed switch that changes the screwdriver's speed range (0-350rpm / 0-1450rpm).
  • LCD screen showing battery charge status and operating mode: Screwing (FWD) / Unscrewing (REV).
  • Equipped with a magnet on the casing, which ensures excellent functionality and ease of use. This magnet is used for the secure storage and holding of bits and screws, without the risk of loss or scattering.
  • Handle made of soft non-slip material, so the device fits securely in your hand and is comfortable to use.
  • The comfort of work is increased by the low weight of the screwdriver (1.15 kg).
  • Possibility of attaching a wrist strap, its use prevents the screwdriver from falling.
  • Additionally, there are indicators on the side of the device that show the battery charge status.

Specifications

  • Maximum battery voltage: 20V
  • Rotations per minute I: 0-350rpm
  • Rotation speed II: 0-1450rpm
  • Maximum torque: 37Nm
  • Handle diameter: 10mm
  • Battery capacity: 2Ah
  • Battery type: lithium-ion
  • LED light
  • LCD screen
  • 21-stage clutch + drilling
  • Battery charging time: 3h
  • Weight of the screwdriver with one battery: 1.15kg (0.85kg + 0.3kg)
  • Weight of the entire set in the case: 2.5kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Number of Batteries
1
Battery Voltage
20 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
2 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

Features & Functions

Maximum Motor Speed
1450 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
37 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Torque Adjustment
No

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Reception
Quick Change
Maximum Chuck Diameter
10 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
1150 gr

Extra Features

Carrying Case
Hard Case

Carrying Case

Hard Case
Delivered with a hard carrying case.
Handle Included
No
Integrated Light
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

107,78 €
14,00 €   shipping cost