Skroutz.mt

Geko Electric Surface Water Pump 750W Single-Phase
Surface Water Pumps

Geko Electric Surface Water Pump 750W Single-Phase Code: G81459

The Q1DP-750K submersible pump is ideal for:

  • pumping water from tanks
  • watering gardens
  • drainage
  • collecting rainwater
  • pumping water from pools
  • draining flooded basements
  • draining clean and slightly...

The Q1DP-750K submersible pump is ideal for:

  • pumping water from tanks
  • watering gardens
  • drainage
  • collecting rainwater
  • pumping water from pools
  • draining flooded basements
  • draining clean and slightly dirty water

The pump features a single-phase motor with a true power of 750W. The reinforced structure plastic "vortex" rotors grind impurities up to 16 mm in...

See full description See full description

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
  • Voltage Single-Phase

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
Review the product
Product report

Description

Description

The Q1DP-750K submersible pump is ideal for:

  • pumping water from tanks
  • watering gardens
  • drainage
  • collecting rainwater
  • pumping water from pools
  • draining flooded basements
  • draining clean and slightly dirty water

The pump features a single-phase motor with a true power of 750W. The reinforced structure plastic "vortex" rotors grind impurities up to 16 mm in diameter (solid particle content >2%). The motor is also equipped with thermal overload protection.

The built-in switch with an additional element prevents the operation of the pump without water, thus extending its lifespan. It has automatic operation, so when the water level drops to a minimum, the pump automatically stops. The pump has a switch that allows it to operate in automatic or manual mode.

The maximum head is the height to which it can pump fluid: our pump lifts liquid up to 9 meters. It can be submerged at a depth of 7 meters.

The lightweight of the device is due to its durable plastic construction.

Technical specifications:

  • Power supply: 230V / 50Hz
  • Power: 750W
  • Maximum flow rate: 13,000 liters/hour
  • Maximum pumping height: 9 m
  • Maximum depth: 7 m
  • Pump outlet: 1", 1-1/4", 1-1/2"
  • Power cable length: 10 m
  • Material: technical plastic
  • Maximum temperature of pumped liquid: 35°C
  • Ingress protection rating: IPX8
  • Power cable specification: H05RN-F 3G*1.0mm2
  • Additional information: built-in switch with manual operation

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
G81459

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Power
750 W
Manometric Head
10 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Q1DP-750K submersible pump is ideal for:

  • pumping water from tanks
  • watering gardens
  • drainage
  • collecting rainwater
  • pumping water from pools
  • draining flooded basements
  • draining clean and slightly dirty water

The pump features a single-phase motor with a true power of 750W. The reinforced structure plastic "vortex" rotors grind impurities up to 16 mm in diameter (solid particle content >2%). The motor is also equipped with thermal overload protection.

The built-in switch with an additional element prevents the operation of the pump without water, thus extending its lifespan. It has automatic operation, so when the water level drops to a minimum, the pump automatically stops. The pump has a switch that allows it to operate in automatic or manual mode.

The maximum head is the height to which it can pump fluid: our pump lifts liquid up to 9 meters. It can be submerged at a depth of 7 meters.

The lightweight of the device is due to its durable plastic construction.

Technical specifications:

  • Power supply: 230V / 50Hz
  • Power: 750W
  • Maximum flow rate: 13,000 liters/hour
  • Maximum pumping height: 9 m
  • Maximum depth: 7 m
  • Pump outlet: 1", 1-1/4", 1-1/2"
  • Power cable length: 10 m
  • Material: technical plastic
  • Maximum temperature of pumped liquid: 35°C
  • Ingress protection rating: IPX8
  • Power cable specification: H05RN-F 3G*1.0mm2
  • Additional information: built-in switch with manual operation

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
G81459

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Power
750 W
Manometric Head
10 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

76,93 €
17,00 €   shipping cost