Set the delivery location to see products according to your choice.
Key features:
Improve the air quality in your home with one of the HEPA filter dehumidifiers from the AlecoAir Purify range!
See full descriptionImprove the air quality in your home with one of the HEPA filter dehumidifiers from the AlecoAir Purify range!
D16 Purify is a 2-in-1 device, ensuring the elimination of excess humidity from the air, maintaining optimal humidity levels, and filtering airborne pollutants thanks to the HEPA filter that can be installed on the device.
This dehumidifier-purifier is designed for low energy consumption. The cooling agent used, R290, has ZERO impact on the ozone layer.
D16 Purify meets the highest standards of usability and quality, ensuring reliable performance and compliance with international regulations.
The AlecoAir D16 PURIFY dehumidifier is equipped with advanced technology for silent operation, recognized and certified by Quiet Mark. This certification confirms compliance with the strictest noise standards, ensuring a comfortable and quiet experience in any environment.
The HEPA filter is delivered in a separate filter box placed inside the dehumidifier box to prevent it from being lost during transport.
The dehumidifier does not come with the HEPA filter pre-installed and works even without it.
Home or office use in spaces up to 35 m²
Removing excess moisture – Humidity levels over 60% can cause mold and thermal discomfort. [Learn more about the effects of high humidity here.]
Maintaining healthy humidity levels (40–60% RH recommended) to prevent mold and dampness
Improving thermal comfort – especially during hot, rainy summers
Faster laundry drying using the Clothes Drying function (best used in small, heated rooms for better efficiency)
Wi-Fi Control: Control the unit remotely via the AlecoAir app (2.4 GHz Wi-Fi networks only).
Also compatible with Smart Life – Smart Living / Tuya Smart apps (App Store & Google Play).
Can be voice-controlled via Google Home, Alexa, or Siri
Ionization Function: Releases negative ions that attach to dust and pollutants in the air, making them heavier and easier to capture. This also refreshes the air and supports better mental clarity.
Target Humidity Setting: Built-in hygrostat lets you set the desired humidity between 30% and 80% RH in 5% increments. When humidity exceeds the set value, the unit restarts automatically. Once the target is reached, the fan stops after 5 minutes.
Clothes Drying Mode: Speeds up drying time significantly.
Air Purification Mode: Can be used independently from dehumidification
Timer: Set shutdown between 1–24 hours (Wi-Fi and Ionization models can be programmed only through the app).
2 Fan Speeds
2 Operating Modes:
Clothes Drying Mode – continuous operation at high fan speed for 6 hours, then shuts off
Manual Mode – set the desired humidity, and the device runs until the target is reached
Child Lock: Press and hold the fan speed button for 2 seconds to activate. Usable in Standby or Operating mode. Not available when the tank is full.
Auto Stop: When the tank is full or not correctly positioned, the unit goes into standby, the indicator light turns on, and a sound alert is emitted.
Auto Restart + Memory: In case of a power outage, the unit resumes previous settings upon power restoration. If manually turned off and on, it will resume its last operation mode but cancel the timer.
Continuous Drain Option via a 13 mm hose (not included)
The recommended surface area is calculated for a ceiling height of 2.5 meters.
WARNING: Please note that depending on the compressor's power, the room temperature may increase by 2–4°C.
The HEPA filter effectively traps over 95% of airborne particles, which may slightly affect some technical parameters of the product. Using the HEPA filter may lead to:
an increase in noise level by 3% to 5%,
an increase in energy consumption by 5% to 10%,
a reduction in dehumidification performance by 10% to 15%.
It is recommended to replace the HEPA filter when it is saturated with dirt to maintain the device's performance. Replace the HEPA filter every 6–12 months or when:
the filter changes color and becomes gray,
the device emits a strong or unpleasant odor, indicating that dust and pollutants are recirculating in the air,
airflow becomes uneven due to accumulation of particles in parts of the filter,
overall airflow decreases due to filter blockage.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
