Set the delivery location to see products according to your choice.
Key features:
Improve the air quality in your home with one of the HEPA filter dehumidifiers from the AlecoAir Purify range!
See full descriptionImprove the air quality in your home with one of the HEPA filter dehumidifiers from the AlecoAir Purify range!
D22 Purify is a 2-in-1 device, ensuring the elimination of excess humidity from the air, maintaining optimal humidity levels, and filtering airborne pollutants thanks to the HEPA filter that can be installed on the device.
This dehumidifier-purifier is designed for low energy consumption. The cooling agent used, R290, has ZERO impact on the ozone layer.
D22 Purify meets the highest standards of usability and quality, ensuring reliable performance and compliance with international regulations.
The HEPA filter is delivered in a separate filter box placed inside the dehumidifier box to prevent it from being lost during transport.
The dehumidifier does not come with the HEPA filter pre-installed and works even without it.
Also compatible with Smart Life – Smart Living / Tuya Smart apps (App Store & Google Play).
Can be voice-controlled via Google Home, Alexa, or Siri
Target Humidity Setting: Built-in hygrostat lets you set the desired humidity between 30% and 80% RH in 5% increments. When humidity exceeds the set value, the unit restarts automatically. Once the target is reached, the fan stops after 5 minutes.
Clothes Drying Mode: Speeds up drying time significantly.
Air Purification Mode: Can be used independently from dehumidification
Timer: Set shutdown between 1–24 hours (Wi-Fi and Ionization models can be programmed only through the app).
2 Fan Speeds
2 Operating Modes:
Clothes Drying Mode – continuous operation at high fan speed for 6 hours, then shuts off
Manual Mode – set the desired humidity, and the device runs until the target is reached
Child Lock: Press and hold the fan speed button for 2 seconds to activate. Usable in Standby or Operating mode. Not available when the tank is full.
Auto Stop: When the tank is full or not correctly positioned, the unit goes into standby, the indicator light turns on, and a sound alert is emitted.
Auto Restart + Memory: In case of a power outage, the unit resumes previous settings upon power restoration. If manually turned off and on, it will resume its last operation mode but cancel the timer.
Continuous Drain Option via a 13 mm hose (not included)
The recommended surface area is calculated for a ceiling height of 2.5 meters.
WARNING: Please note that depending on the compressor's power, the room temperature may increase by 2–4°C.
The HEPA filter effectively retains over 95% of airborne microparticles, which may slightly affect some of the product's technical parameters. Using the HEPA filter may result in:
a 3% to 5% increase in noise level,
a 5% to 10% increase in energy consumption,
a 10% to 15% decrease in dehumidification performance.
It is recommended to replace the HEPA filter when it becomes saturated with impurities to maintain the device's performance.
Replace the HEPA filter every 6–12 months or when:
the filter changes color and turns gray
the device emits a strong or unpleasant odor, indicating that dust and pollutants are being recirculated into the air
the airflow becomes uneven due to particle buildup in parts of the filter
the overall airflow is reduced due to filter clogging.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
