Skroutz.mt

TP-LINK EAP211-Bridge KIT v1 Access Point Wi‑Fi 5 Single Band (5GHz) White
Access Points

TP-LINK EAP211-Bridge KIT v1 Access Point Wi‑Fi 5 Single Band (5GHz) White

802.11ac for up to 867 Mbps on the 5 GHz wireless data rate.

Ideal for long-range wireless transmission up to 1 km.

Automatic pairing and LED for efficient deployment.

3 Gigabit Ethernet ports...

802.11ac for up to 867 Mbps on the 5 GHz wireless data rate.

Ideal for long-range wireless transmission up to 1 km.

Automatic pairing and LED for efficient deployment.

3 Gigabit Ethernet ports for more high-speed IP camera connections.

Supports Omada SDN for remote and centralized management.

The IP65 waterproof enclosure and 6 kV lightning protection...

See full description See full description

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Single Band (5GHz)

    An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.

  • Wi-Fi Generation

    Wi‑Fi 5

    The most widespread Wi-Fi standard, significantly faster than Wi-Fi 4. Wi-Fi 5 can meet the needs of most users for now. The next generation (Wi-Fi 6) began to be released in 2019 and offers the ability to connect many more devices to accommodate the increasing number of smart devices in a home.

    Each newer generation is compatible with devices that support a previous one.
  • See all
147 00 €
Delivery by Fri, 03 Jul
14,00 €   shipping cost
Sent from Greece
From T support 4.9 (38)
4.9 (38 reviews)
Greece
1 piece
See Networking on the page of T support
Review the product
Product report

Description

Description

802.11ac for up to 867 Mbps on the 5 GHz wireless data rate.

Ideal for long-range wireless transmission up to 1 km.

Automatic pairing and LED for efficient deployment.

3× Gigabit Ethernet ports for more high-speed IP camera connections.

Supports Omada SDN for remote and centralized management.

The IP65 waterproof enclosure and 6 kV lightning protection ensure suitability for all weather conditions.

Supports passive PoE.

Wi-Fi transmission over long distances of 1 km

Easy and simple deployment

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Single Band (5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (5GHz)
An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
Maximum WLAN Speed
867 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 5

Wi-Fi Generation

Wi‑Fi 5

The most widespread Wi-Fi standard, significantly faster than Wi-Fi 4. Wi-Fi 5 can meet the needs of most users for now. The next generation (Wi-Fi 6) began to be released in 2019 and offers the ability to connect many more devices to accommodate the increasing number of smart devices in a home.

Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11 b/g/n, 802.11a, 802.11ac
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
7 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
Transmit Power (max)
30 dBm

Transmit Power (max)

Indicates how strong the signal emitted by the device is. A higher value means a stronger signal and greater range, always depending on the space and conditions.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Outdoor, Indoor
Ethernet Ports
3

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

802.11ac for up to 867 Mbps on the 5 GHz wireless data rate.

Ideal for long-range wireless transmission up to 1 km.

Automatic pairing and LED for efficient deployment.

3× Gigabit Ethernet ports for more high-speed IP camera connections.

Supports Omada SDN for remote and centralized management.

The IP65 waterproof enclosure and 6 kV lightning protection ensure suitability for all weather conditions.

Supports passive PoE.

Wi-Fi transmission over long distances of 1 km

Easy and simple deployment

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Single Band (5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (5GHz)
An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
Maximum WLAN Speed
867 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 5

Wi-Fi Generation

Wi‑Fi 5

The most widespread Wi-Fi standard, significantly faster than Wi-Fi 4. Wi-Fi 5 can meet the needs of most users for now. The next generation (Wi-Fi 6) began to be released in 2019 and offers the ability to connect many more devices to accommodate the increasing number of smart devices in a home.

Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11 b/g/n, 802.11a, 802.11ac
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
7 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
Transmit Power (max)
30 dBm

Transmit Power (max)

Indicates how strong the signal emitted by the device is. A higher value means a stronger signal and greater range, always depending on the space and conditions.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Outdoor, Indoor
Ethernet Ports
3

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

147,00 €
14,00 €   shipping cost