Skroutz.mt

Ideal Automatic Circuit Breaker 10A Single-pole AC 23145
Automatic Circuit Breaker

Ideal Automatic Circuit Breaker 10A Single-pole AC 23145

Circuit breaker 1P C 10A AC (23145)

Used for protecting wires from overload and short circuit in installations and devices. Compliance with standards EN60898-1/IEC60898-1.

  • Rated voltage: 230/400V~
  • ...

Circuit breaker 1P C 10A AC (23145)

Used for protecting wires from overload and short circuit in installations and devices. Compliance with standards EN60898-1/IEC60898-1.

  • Rated voltage: 230/400V~
  • Rated frequency: 50/60Hz
  • Rated short-circuit current: 6000A
  • Mounting on DIN rail 35mm
  • Electrical lifespan: 4000
  • Cable cross-section: from 1 to 25mm2
  • Number of...
See full description See full description
Review the product
Product report

Description

Description

Circuit breaker 1P C 10A AC (23145)

Used for protecting wires from overload and short circuit in installations and devices. Compliance with standards EN60898-1/IEC60898-1.

  • Rated voltage: 230/400V~
  • Rated frequency: 50/60Hz
  • Rated short-circuit current: 6000A
  • Mounting on DIN rail 35mm
  • Electrical lifespan: 4000
  • Cable cross-section: from 1 to 25mm2
  • Number of poles: 1
  • Rated current: 10A
  • Voltage type: AC
  • Ingress protection: IP20

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Number of Poles
1
Rated Current
10 A
Operating Curve
Curve C

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve C

The most common in general installations, ideal for circuits with motors or electronic devices.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Circuit breaker 1P C 10A AC (23145)

Used for protecting wires from overload and short circuit in installations and devices. Compliance with standards EN60898-1/IEC60898-1.

  • Rated voltage: 230/400V~
  • Rated frequency: 50/60Hz
  • Rated short-circuit current: 6000A
  • Mounting on DIN rail 35mm
  • Electrical lifespan: 4000
  • Cable cross-section: from 1 to 25mm2
  • Number of poles: 1
  • Rated current: 10A
  • Voltage type: AC
  • Ingress protection: IP20

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Number of Poles
1
Rated Current
10 A
Operating Curve
Curve C

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve C

The most common in general installations, ideal for circuits with motors or electronic devices.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

5,10 €
14,00 €   shipping cost