The NetGear GS752TPP-300EUS managed Layer 2 switch connects devices via 48 Gigabit Ethernet ports with PoE+ and 4 SFP ports. It supports VLAN, Access Control List (ACL), ARP inspection, and DHCP snooping, and can be rack-mounted. It runs on AC power and features three fans.
- Type: Managed Layer 2 switch
- Ethernet ports: 48 RJ-45 Gigabit Ethernet (10/100/1000 Mbps)
- SFP ports: 4
- USB ports: 1 USB Type-A
- PoE+: 48 ports, with IEEE 802.3af and IEEE 802.3at support
- PoE power: 760 W per port
- Switching capacity: 104 Gbit/s
- MAC address table: 16,000 entries
- Packet buffer memory: 1.5 MB
- Latency: 9.617 μs at 10–100 Mbps and 4.411 μs at 1 Gbps
- VLAN: Supports up to 256 VLANs
- Routes: 32 IPv4 and 32 IPv6
- Multicast: Supports filtering 512 groups
- Management and security: Access Control List (ACL) with 100 IPv4 entries, ARP inspection, DHCP snooping, and DHCPv6 client
- Network standards: IEEE 802.1D, IEEE 802.3ad, IEEE 802.1s, IEEE 802.1Q, IEEE 802.3x, IEEE 802.1w
- Processor: ARM Cortex-A55, 800 MHz
- Internal memory: 512 MB
- Flash memory: 64 MB
- Power supply: AC, with EU plug
- Power consumption: Typical 49 W, maximum 861 W
- Fans: 3, with redundancy support
- Noise level: 39.3 dB
- Heat dissipation: 2,944.6 BTU/h
- Mounting: Rack-mountable
- Color: Gray
- Dimensions: Width 440 mm, depth 310 mm, height 432 mm
- Weight: 5.03 kg
- Operating conditions: 0 to 50 °C, relative humidity 0–90%
- Storage conditions: -20 to 70 °C, relative humidity 0–95%
- Mean time between failures (MTBF): 1,296,949 h
- Certifications: BSMI, CE
Network Specifications
- Type
- Managed
- Layer
- L2
- PoE
- Yes
- PoE Version
- 802.3af, 802.3at
Technical Specifications
- Ethernet connections
- 48 Port
- Ethernet Speed
- 1000 Mbps
- SFP connections
- 4 Port
- Switching Speed
- 1 Gbps
- Rack mounting
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.