The F&F Wi-MEF-3 three-phase energy analyzer with analog display measures energy consumption in a three-phase, four-wire installation. It connects via 2.4 GHz Wi-Fi and uses measuring transformers with a primary current of 40 A and a secondary current of 30 mA.
- Display type: Analog
- Number of phases: 3
- Installation configuration: Three-phase, 4-wire
- Connectivity: Wi-Fi
- Radio communication frequency: 2.4 GHz
- Supply voltage: 3× 230/400 V AC (-25%÷15%)
- Frequency: 50÷60 Hz
- Maximum current: 40 A
- Measuring transformer secondary current: 30 mA
- Measuring transformer conductor diameter: ≤10 mm
- Meter accuracy: 1%
- Measuring transformer accuracy: 0.5%
- Meter constant: 1000 imp/kWh
- Radio communication power: Below 20 dBm (IEEE 802.11n)
- Receiver sensitivity: 98 dBm
- Connection: Screw terminals, 2.5 mm² for flexible conductors and 4.0 mm² for solid conductors
- Tightening torque: 0.5 Nm
- Power consumption: Up to 2 W
- Operating humidity, non-condensing: Below 90%
- Operating temperature: -20÷50 °C
- Dimensions: 2 modules (35 mm)
- Mounting: On a 35 mm DIN rail
- Protection rating: IP20
Specifications
- Type
- Energy Analyzer
- Display Type
- Analog
- Number of Phases
- Three-phase
- Maximum Current
- 40 A
Smart Features
- Connectivity
- Wi-Fi
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.