The Schneider Electric Acti 9 IC60N miniature circuit breaker interrupts the circuit using thermal-magnetic tripping and has a C tripping curve. It is suitable for AC and DC networks and also functions as an isolating switch.
- Number of poles: 3
- Rated current: 4 A
- Network: AC and DC
- Tripping curve: C
- Tripping technology: Thermal-magnetic
- Icu breaking capacity: 10 kA at 125...180 V DC, 50 kA at 12...133 V AC, 25 kA at 440 V AC, 50 kA at 380...415 V AC and 220...240 V AC
- Icn breaking capacity: 6000 A at 400 V AC
- Network frequency: 50/60 Hz
- Isolation function: Yes
- Utilization category: A
- Current-limiting class: 3
- Rated insulation voltage Ui: 500 V AC
- Rated impulse withstand voltage Uimp: 6 kV
- Contact position indication: Yes
- Operation: Toggle
- Local indication: Tripping indication
- Installation: DIN rail
- Width: 6 modules of 9 mm (54 mm)
- Height: 91 mm
- Depth: 78.5 mm
- Weight: 0.375 kg
- Colour: White
- Mechanical endurance: 20,000 cycles
- Electrical endurance: 10,000 cycles
- Terminals: Dual, top or bottom, for flexible conductors 1...16 mm² and rigid conductors 1...25 mm²
- Stripping length: 14 mm
- Tightening torque: 2 N·m
- Earth-leakage protection: With a separate block
- Standards: EN 60898-1, EN 60947-2, IEC 60898-1, IEC 60947-2
- Degree of protection: IP20
- Pollution degree: 3
- Overvoltage category: IV
- Tropicalization: 2
- Relative humidity: 95% at 55 °C
- Operating temperature: -35...70 °C
- Storage temperature: -40...85 °C
Specifications
- Number of Poles
- 3
- Rated Current
- 4 A
- Operating Curve
- Curve C
Power Supply
- AC
- Yes
- DC
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.