The Schneider Electric Acti 9 iC60 miniature circuit breaker is a thermal-magnetic circuit breaker for distribution applications. It provides single-pole protection, has a C tripping curve, and operates on AC and DC networks. It features an isolation function and is mounted on a DIN rail.
- Number of poles: 1P + N
- Protected poles: 1
- Neutral position: Left
- Rated current: 4 A
- Current type: AC and DC
- Tripping technology: Thermal-magnetic
- Tripping curve: C
- Breaking capacity Icu: 70 kA at 220–240 V AC, 12–60 V AC and 100–133 V AC
- Breaking capacity Icn: 10,000 A at 230 V AC
- Utilization category: A
- Isolation function: Yes
- Standards: EN 60898-1, EN 60947-2, IEC 60898-1, IEC 60947-2
- Network frequency: 50/60 Hz
- Upper magnetic tripping threshold: 8 × In ± 20%
- Current-limiting class: 3
- Rated insulation voltage: 500 V AC
- Rated impulse withstand voltage: 6 kV
- Contact position indication: Yes
- Control type: Toggle
- Local signaling: Tripping indication
- Mounting base: DIN rail
- Width in 9 mm modules: 4
- Height: 91 mm
- Width: 36 mm
- Depth: 78.5 mm
- Weight: 0.25 kg
- Color: White
- Mechanical endurance: 20,000 cycles
- Electrical endurance: 10,000 cycles
- Stripping length: 14 mm, top or bottom
- Tightening torque: 2 N·m, top or bottom
- Residual current protection: With a separate block
- IP rating: IP20
- Pollution degree: 3
- Overvoltage category: IV
- Tropicalization: 2
- Relative humidity: 95% at 55 °C
- Operating temperature: -35 to 70 °C
- Storage temperature: -40 to 85 °C
Specifications
- Number of Poles
- 1
- Rated Current
- 4 A
- Operating Curve
- Curve C
Power Supply
- AC
- Yes
- DC
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.