Skroutz.mt

Concept Ventilation Mechanism 52cm Gray
Vent Hoods

Concept Ventilation Mechanism 52cm Gray Code: OPI3060

The Okap OPI3060 hood features a practical power adjustment capability, allowing for immediate increase to maximum power for the removal of cooking moisture and unwanted odors, as well as nitrogen...

The Okap OPI3060 hood features a practical power adjustment capability, allowing for immediate increase to maximum power for the removal of cooking moisture and unwanted odors, as well as nitrogen oxide produced when cooking with gas. It is important to install it at least 50 cm above the surface of the electric or gas stove.

Energy-efficient LED lights...

See full description See full description

  • Item

    Absorption Mechanism

    "They are built-in hoods that are installed in cabinets and only the bottom surface of the hood is visible, additionally they do not have sliding filters."

  • Noise Level

    Shows how much noise the extractor makes when it is in operation.

    2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

  • Energy class

    The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

    2. The higher the energy class, the lower the electricity consumption.

    3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.

  • Extraction Power (Max)

    Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


    For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

  • Filter Type

    Metal

    They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
  • See all
Review the product
Product report

Description

Description

The Okap OPI3060 hood features a practical power adjustment capability, allowing for immediate increase to maximum power for the removal of cooking moisture and unwanted odors, as well as nitrogen oxide produced when cooking with gas. It is important to install it at least 50 cm above the surface of the electric or gas stove.

Energy-efficient LED lights provide excellent illumination for your stove, saving electricity compared to classic bulbs and offering longer lifespan.

The recirculation function allows for moisture absorption if there is no possibility of external extraction. In this case, a carbon filter must be added behind the grease filter. During recirculation, air is absorbed, filtered, and freed from any odors thanks to the activated carbon. The clean air returns to the room. For the proper operation of the recirculation hood, an air outlet through the kitchen cabinet to the space is necessary.

Carbon filters should be replaced regularly, depending on the frequency of hood use.

The cleaning process is easy. The grease filter can be placed in the dishwasher and set to a normal program, returning to its condition as when it was new. If you do not have access to a dishwasher, water and a few simple movements are sufficient.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
OPI3060

Product Details

Type
Absorption Mechanism

Type

Absorption Mechanism
"They are built-in hoods that are installed in cabinets and only the bottom surface of the hood is visible, additionally they do not have sliding filters."
Retro
No
Grease Filter Material
Metal

Grease Filter Material

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Recirculation

The air is recycled in the extractor. It is recommended only in cases where a pipe cannot be installed in the kitchen, and in this case the extractor must have charcoal filters.
Dual Motor
Yes
Type of Control
Switches
Timer Function
No
Filter Cleaning Indicator
No
Washable Filter
Yes
Colour
Grey

Technical Features

Extraction Power (Max)
517 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

Dimensions

Width
52 cm
Length
-

Energy Label

Energy Class
C

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
41 kWh/y
Extraction Flow Efficiency
E

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
D

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
60 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Okap OPI3060 hood features a practical power adjustment capability, allowing for immediate increase to maximum power for the removal of cooking moisture and unwanted odors, as well as nitrogen oxide produced when cooking with gas. It is important to install it at least 50 cm above the surface of the electric or gas stove.

Energy-efficient LED lights provide excellent illumination for your stove, saving electricity compared to classic bulbs and offering longer lifespan.

The recirculation function allows for moisture absorption if there is no possibility of external extraction. In this case, a carbon filter must be added behind the grease filter. During recirculation, air is absorbed, filtered, and freed from any odors thanks to the activated carbon. The clean air returns to the room. For the proper operation of the recirculation hood, an air outlet through the kitchen cabinet to the space is necessary.

Carbon filters should be replaced regularly, depending on the frequency of hood use.

The cleaning process is easy. The grease filter can be placed in the dishwasher and set to a normal program, returning to its condition as when it was new. If you do not have access to a dishwasher, water and a few simple movements are sufficient.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
OPI3060

Product Details

Type
Absorption Mechanism

Type

Absorption Mechanism
"They are built-in hoods that are installed in cabinets and only the bottom surface of the hood is visible, additionally they do not have sliding filters."
Retro
No
Grease Filter Material
Metal

Grease Filter Material

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Recirculation

The air is recycled in the extractor. It is recommended only in cases where a pipe cannot be installed in the kitchen, and in this case the extractor must have charcoal filters.
Dual Motor
Yes
Type of Control
Switches
Timer Function
No
Filter Cleaning Indicator
No
Washable Filter
Yes
Colour
Grey

Technical Features

Extraction Power (Max)
517 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

Dimensions

Width
52 cm
Length
-

Energy Label

Energy Class
C

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
41 kWh/y
Extraction Flow Efficiency
E

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
D

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
60 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

219,55 €
50,00 €   shipping cost