CA-210 ALCAD 24V Broadband Antenna Amplifier

Application: The CA-210 amplifier is used as a subscriber amplifier for distributing the signal to several receivers. Its main feature is operation in the frequency range of 40 - 400 MHz and 470 - 862 MHz.

Thanks to the independent gain adjustment in the VHF and UHF bands, it is possible to adjust the gain to the signal level in each band. This facilitates the construction of antenna installations using a single cable to transmit signals from all antennas (after combining with branching).

The amplifiers can be used in some cable networks or collective installations that do not operate on special channels S30 - S38. The amplifier is recommended for use in situations where the signal level is low. Additionally, it is possible to power preamplifiers.

Safety when using the amplifier: The CA-210 amplifier is powered by a built-in stabilized power supply. It is not intended for outdoor operation. It cannot be placed in high humidity conditions and near radiators and other heat sources. Ventilation is required. Due to the possibility of damage, do not connect the power supply until all connections are made correctly.

The CA-210 amplifier allows the powering of preamplifiers with a voltage of 24 V and a maximum current of 55 mA, e.g., Alcad mast preamplifiers.

• VHF/UHF Gain: 16 dB / 12 dB
• Protection: IP20
• Operating Temperature: -5~60°C
• VHF/UHF School Index: >= 10 dB
• VHF/UHF Frequency Range: 40-400 MHz / 470-862 MHz