BIS-413I bistable relay with timer for activation/deactivation DIN rail 230V 16A InRush160A/20ms 1P. Screw terminals contacts 1 unit.

The "i" version of the relay has a contact designed to operate with high inrush current receivers, such as: LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.

The electronic bistable pulse relay BIS-413 allows the activation/deactivation of lighting or other devices for a specified time or permanently. The operation of the device is controlled by one or more momentary switches (bell) connected in parallel.

The activation of the relay power supply is indicated by the green LED lighting. The red LED indicates the operating status of the device.

The relay activation status is indicated by the blinking red LED. Permanent activation is achieved by holding down the momentary button for at least 2 seconds.

Technical Specifications:

• Power supply: BIS-413i 230V 100÷265V AC
• Contact/load current: 1×NO
• Activation delay: 0.1÷0.2s
• Deactivation time: adjustable 1÷12 minutes
• LED power indicator: Green
• Activation signal LED: Red
• Power consumption: standby 0.15 W, activated state 0.6W
• Operating temperature: -25÷50°C
• Connection: Screw terminals 2.5 mm²
• Tightening torque: 0.4 Nm
• Dimensions: 1 unit (18 mm)
• Installation: on 35 mm rail
• Protection rating: IP20