White acrylic construction putty for indoor and outdoor use. Fills properly, dries quickly, sands easily, and provides smooth surfaces. It is used for puttying and skimming walls, exposed concrete, wood, as well as for decorative applications.

General Characteristics:

• White water-soluble acrylic putty for interior and exterior surfaces.
• High resistance to moisture and temperature fluctuations.
• Simple to use and apply.
• Dries quickly without cracking.
• Sands easily and provides a smooth surface.

Technical Specifications:

• Surface drying time: 30min.
• Application with a spatula.

Preparation Instructions:

Surfaces must be clean, dry, and smooth, free of dust, oils, or any loose materials.

Application:

Apply with a spatula without thinning. Sand with sandpaper after about 2-3 hours, and after cleaning, paint with water-based or solvent-based acrylic paints. It should not be applied at temperatures below 5°C, above 35°C, and/or relative humidity over 80%.

Tools should be cleaned immediately after use with water and, if needed, with soap or detergent.