Skroutz.mt

Yato Electric Surface Water Pump 1200W
Surface Water Pumps

Yato Electric Surface Water Pump 1200W Code: YT-85370

The Yato YT-85370 pressure booster set pumps clean water and automatically supplies homes, holiday houses, gardens and installations without a connection to the mains water supply. The pressure switch...

The Yato YT-85370 pressure booster set pumps clean water and automatically supplies homes, holiday houses, gardens and installations without a connection to the mains water supply. The pressure switch starts the pump when the pressure drops and stops it when it reaches the preset level. The maximum flow rate is 4 m³/h, and the maximum head is 50 m.

The pump...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
214 00 €
Delivery by Tue, 10 Nov
41,00 €   shipping cost
Sent from Greece
From Dagiopoulos 3.9 (8)
3.9 (8 reviews)
Greece
2 pieces
See Water Pumps on the page of Dagiopoulos

Learn more about invoicing
Review the product
Product report

Description

Description

The Yato YT-85370 pressure booster set pumps clean water and automatically supplies homes, holiday houses, gardens and installations without a connection to the mains water supply. The pressure switch starts the pump when the pressure drops and stops it when it reaches the preset level. The maximum flow rate is 4 m³/h, and the maximum head is 50 m.

The pump housing and pressure tank are made of stainless steel. The 19 L tank serves as a pressure reserve, while the built-in pressure gauge lets you monitor system pressure. Holes in the base allow the set to be secured to the floor. It is intended for clean water only and must not be operated without water.

  • Power supply: Electric, 230 V AC, 50 Hz
  • Power: 1,200 W
  • Maximum flow rate: 4 m³/h (4,000 L/h)
  • Maximum head: 50 m
  • Maximum suction depth: 9 m
  • Tank capacity: 19 L
  • Pump housing and tank material: Stainless steel
  • Water connection: G1 (1")
  • Cut-in pressure: 0.15 MPa (1.5 bar)
  • Cut-out pressure: 0.28 MPa (2.8 bar)
  • Maximum tank air pressure: 0.28 MPa (2.8 bar)
  • Maximum water temperature: 35 °C
  • Protection rating: IPX4
  • Electrical insulation class: I
  • Cable length: 1.5 m
  • Sound pressure level: 69.43 ± 1.49 dB(A)
  • Sound power level: 82.35 ± 1.49 dB(A)
  • Weight: 10.6 kg
  • Included accessories: Pressure switch, pressure gauge and flexible connecting hose

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
YT-85370

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Power
1200 W
Manometric Head
50 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Yato YT-85370 pressure booster set pumps clean water and automatically supplies homes, holiday houses, gardens and installations without a connection to the mains water supply. The pressure switch starts the pump when the pressure drops and stops it when it reaches the preset level. The maximum flow rate is 4 m³/h, and the maximum head is 50 m.

The pump housing and pressure tank are made of stainless steel. The 19 L tank serves as a pressure reserve, while the built-in pressure gauge lets you monitor system pressure. Holes in the base allow the set to be secured to the floor. It is intended for clean water only and must not be operated without water.

  • Power supply: Electric, 230 V AC, 50 Hz
  • Power: 1,200 W
  • Maximum flow rate: 4 m³/h (4,000 L/h)
  • Maximum head: 50 m
  • Maximum suction depth: 9 m
  • Tank capacity: 19 L
  • Pump housing and tank material: Stainless steel
  • Water connection: G1 (1")
  • Cut-in pressure: 0.15 MPa (1.5 bar)
  • Cut-out pressure: 0.28 MPa (2.8 bar)
  • Maximum tank air pressure: 0.28 MPa (2.8 bar)
  • Maximum water temperature: 35 °C
  • Protection rating: IPX4
  • Electrical insulation class: I
  • Cable length: 1.5 m
  • Sound pressure level: 69.43 ± 1.49 dB(A)
  • Sound power level: 82.35 ± 1.49 dB(A)
  • Weight: 10.6 kg
  • Included accessories: Pressure switch, pressure gauge and flexible connecting hose

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
YT-85370

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Power
1200 W
Manometric Head
50 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

214,00 €
41,00 €   shipping cost